Powder Making Machine
Place of Origin: china. Producing electrostatic powder coating equipment.

Flectional Helix Conveyer
Flectional Helix Conveyer is with flexible helix as transmitting mechanism and will rotate brought by motor directly(or driven by speed reducer after speed reducing)to transmit material, and be of flexible character, never be astricted by space, easy to clean.
Flectional Helix conveyer is suitable for transmitting all kinds of powder, granule, ball or flake material. The helix conveyer can transmit material in straight line and also flectional transmission.Because it has high flexibility, it makes operator can arrange all kinds of equipment conveniently. The unique motion part of flectional helix conveyer is just the flexible helix. No matter how far the transmitting distance is, there is no other motion parts such as bearing in the transmitting pipe. Therefore the property of machine is reliable. It does not need to maintain nearly nad cannot take place the problem of pollution caused by lubricating grease of bearing. The other remarkable feature is easy to clean. One person takes five minutes only to disassemble the machine and carry out clean work. The vertical height of transmission for each set of flectional helix conveyer will be as high as 10m and the horizontal distance will be 25m. If several machines are in series, the distance to be transmitted will be father and the height to be transmitted will be higher.

FD Type Self-cleaning Centrifugal Separator
The filter component disposed in a hermetic vessel consists of a group
of horizontal filter discs installed around the hollow core shaft. Each disc is conducted with a hollow core shaft and connected with the motor at the upper end. The filter liquid is drained though an outlet at the bottom of the
plant. Soliquoid in the vessel is filtered though horizontal discs by means of pressuring and vacuumizing. Solid phase material is captured on the face of filter discs to become filter cakes. While discharging, the core shaft driven by the motor and the filter component rotate synchronously and the filter cakes on the face of the filter disc are thrown off the disc face by centrifugal force and then taken though discharge outlet at the bottom of the plant.  Filtering, cleaning, drying can be achieved by means of pre-coating
the filter cloth according to the processing requirments.

Potassium Sulphate Plant
We are in cooperation with China SOP making company, we have succeeded in exporting the complete set SOP (Potassium Sulphate) making plant to Indonesia and Philippines. Product: SOP and 32% Hydrochloric Acid ; Raw Material: KCl and 98% Sulfuric Acid ; Capacity:10,000 mtpy or 20,000 mtpy

Solvent Recycling Machine
Various Tina water, Banana Water, electric oil, dirt-cleaning oil, launder solvent, most organic solvent such as carbinol, ethanol, aether, toluene and more.

Electrostatic Powder Spray Gun
We sell powder gun and powder coating ; Powder guns( electrostatic powder guns) ; Filter powder booths ; Oven system ; Powder coatings ; Phybrid, Polyester, Wrinkled smooth, gloss ; Colour: Ral ; Pack 20kg ; The electrostatic Powder spray gun ; ZAC-lll ; Input Voltage; AC 220~240V 50~60Hz ; Output Voltage: DC 0-100KV Adjustable ; Output current 0.15 M A ; Air Source pressure 0.5 MPa ; Max. Consumption (0.5 MPa)13.2 Nm3/h ; Dead weight of voltage multiplier gun 480 g ; Powder Container Volume:60L ; Max. Storage:30 KG ; Net Weight:32Kg

Pesticide Powder Conveying And Packing
The Sampre powder series can pack dangerous and difficult to handle pesticide powders,a seperate control panel controls the machine within some distance as required by plant out and design for the machine in a different chamber for safe operation and control.

Corrosion And Control Systems
a wide range of corrosion and control systems for the protection of steel and concrete surfaces from corrosion and chemical attack.
1. The introduce of main products: a. Filled reinforced coatings: A carbon flake filled coating for use in Hydrofluoric acid environments. b. Filled reinforced coatings: A mica flake reinforced corrosion resistant resin system for severe environment coating duty or light duty immersion conditions. c. Glass flake linings and coatings: These products are formulated from chemically resistant glass flakes and a wide rang of chemically resistant resins to produce coatings and lining systems with excellent performance characteristics. By using different sizes of glass flakes and various percentage additions (up to 30%) brush, spray and trowel systems are produced. The heavy duty lining versions will in most cases out perform conventional linings, often at lower cost. d. Tankerking: A specially formulated glass flake reinforced lining for the protection of road tankers or rail tankers carrying aggressive chemical and industrial waste products. e. Flooring and concrete protection: Special systems formulated from highly chemical resistant resins and inert fillers reinforced with woven glass fabric or woven synthetic fibers give maximum protection to concrete. Unlike heavily filled (sand or coarse aggregate) un-reinforced floorings which are commonly available, MONARCH concrete protection products have high resin to filler ratios and because of their reinforcement are able to bridge hairline cracks in concrete. In this way aggressive chemicals are prevented from penetrating through to the substrate. These systems can be a viable economic alternative to acid proof brick and tiles.

Edible Salt Production Line
We can supply all kinds of edible salt production machinery including dryer, crusher, washing machine, Packing machine finally to get white crushed salt from china.

Activated Carbon Production Plants Furnaces
We supply turn key plants for producing activated carbon. We supply multiple hearth furnaces for reactivation regeneration of activated carbon.

Resinification Kettle
1) Size: DN3800 x 20 x 10800 ; 2) Material: SUS304

Frp Tank
Adopted filament winding technique, computer-controlled lianzhong filament winding frp corrosion-resistant tanks possesses the advantages of lightness, high strength and corrosion resistance and was mainly used as the container of acid, alkali, salt etc. Raw material and the middle, final products in the chemical industry.

Chemical Machine
1) Suitable for the production of both food and pharmaceutical products and satisfy all GMP requirements ; 2) From china.

Glazing Bell
Gmitm glazing bell has been perfectly applied the newest technology of hydromechanics, flow control and material surface treatment to achieve the uniformity and stability in the glazing process by hugely improving the overglaze obliteration and smoothness. Gmitm glazing bell are widely used in the glazing procedure of the glazed tile, they are sold well in the main domestic tile producing area and exported in batch quantity to southeast Asia and India and have made progress in promotion in Mid East, European and South American market.

Ceramic Cross Ring
Acid resistant ceramic rings are widely used in refineries, chemical engineering, acid plants, gas plants, oxygen plants, steel plants and pharmaceutical plants. They are mainly used as linings of reaction vessel in washing towers, cooling towers, reclaiming towers, desulphurization towers, drying towers and absorbing towers. They can also be used as lining bricks in anti-corrosion pools and channels.

New And Reconditioned Soap Machines
Our products are the following: -Toilet soap finishing lines of any size (from 50 to 3,000 KG/h lines). Single machines such as: Open-sigma mixers, double-arm sigma mixers, dosing units, three roll-mills, any type of plodders, cutters, flashstamping soap presses, conveyors and accessories. Laundry soap lines. Special plodders for translucent soap, synthetic products, striated soap. Continuous or batch saponifications from neutral fats or fatty acids. Vacuum drying plants Soap packaging machines

PTFE / UHMWPE / Plastic Production Equipment
1) PTFE rods: two kinds of PTFE rods. a) One is manufactured by paste extruding method in the diameter from 4 to 9mm. b) The other is made by ram extruding method in the diameter from 10 to 50mm, rods over the diameter 50mm are manufactured by molding. 2) PTFE is the most chemical resistant material of all known plastics, and can be used under condition of temperature from -180 degree centigrade to +260 degree centigrade. 3) PTFE has the lowest coefficient of friction of all known materials. 4) PTFE materials are used for manufacturing of various molding products such as valves, tubes, pumps, parts, liners of anticorrosive equipment, sealing parts. 5) Plastic production line: we supply the full set of production equipment for plastic grains, plates, pipes according to customers' requirement.

Phthalic Anhydride Machine
Capacity: 10000t/y. Designed with West German technology

High Speed Blow Molding Machine
1) Installed power: 144kw ; 2) Standard power consumption: 74kw ; 3) Blowing cavity: 10 ; 4) Bottle volume: 300-2,000ml ; 5) Maximum bottle diameter: 30-90mm ; 6) Maximum output: 10,000bph ; 7) Machine size (electrical cabinet, unscrambler, oven and machine cover excluded) (L x W x H): 4,300 x 3,500 x 3,000 ; 8) N.W.: 7.5MT

Plastic Injection Molding Machine
Place of Origin: China. Dimensions: 11.55 x 2.68 x 2.9cm

Shampoo Production Line
Produced and installed severely based on the industrial standards, this line includes shampoo vessel, mixing vessel, dosage barrel, operation platform control cabinet and such related parts as filters, pipes and valves. The shampoo vessel is the main part in the line, which is composed of inner vessel, steam and cooling water isolated case, outer insulating layer of the isolated case, upper speed-adjustable milling device and material in-and-out device. The inner vessels and outer case are made of stainless steel.

Mill Machine, Pulverizer, Jet Mill, Mill Equipments
Model-lhc and model-lha cyclone jet mill with the original creation: The rate of finished products is over 60%-80% compared with fluidized bed mill and opposing jet mill in the same energy confumption. 2. The precision of classification is very excellent and there characare no coarse graids in the finished products. 3. The pulverizers can be adjusted to produce the the products which you need in shape. 4. The classifiers can be used one or four to process several products in narrow particle size distribution. 5. The size of materials in 3 mm can be processed with the pulverizers. 6. The pulverizers can be designed according to the teristics of the materials and your requirements.

Electrostatic Powder Coating Equipments
(1) rectifier: Source:220/240vac,50/60hz ; Power: <100w ; Output voltage:20~80kv ; Output current:30~100ua
(2) hopper: Air pressure of feeding powder:0.1~0.4mpa ; Air pressure of fluidizing powder:0.01~0.15mpa ; Fogging air pressure:0.05~0.1mpa ; Capacity:50~350g/min ; Volume:15kg
(3) manual gun: Discharge air pressure:0.05~0.3mpa ; Discharge capacity:50~300g/min ; Spraying area: Dia.300mm ; Encirclement effect: Dia.100mm

Horizontal Mixer Assembly and Feeding System
1. It is used in mixing, drying, coloring and other processing. It is the ideal equipment for producing shaped plastics and plastic piping. 2. The technology of the main shaft sealing has been given a state patent. 3. The mixing heater has two functioning systems: electric heating and steam heating. Cool mixing uses a bigger aperture to increase the cooling area. 4. Two layers of sealing technology have been utilized in the production of the cover. 5. The opening to the cover of the mixing heater has a valve using a hydraulic pressure control system. 6. The electric control section uses famous brand-name imported meters, control components and programmable logic control (PLC). It is equipped with a pulse-dusting device at the international advanced level set in the 1990s.

Oxygen Plants, Nitrogen Plants, Acetylene Plants, Nitrous Oxide Plants
We take this opportunities to introduce ourselves as one of the leading manufacturers and exporters of industrial & medical gas plant for producing oxygen, nitrogen, and acetylene gases from India. We are producing oxygen, medical oxygen, nitrogen, liquid oxygen, nitrous oxide, and acetylene gas plant. Our present range of manufacturing include betterdeal bdm oxygen/nitrogen gas plants of 25 to 500 cu. M. HR capacity, acetylene gas plants of 25,45 and 100 cu. M. HR capacity and nitrous oxide plants of 8,16 & 24 cu. M. HR capacity.

Complete Benzyl Alcohol Plant With Annual Production 3000 MT
We sell a complete benzyl alcohol plant. Annual production capacity:3000 TPA. Sell complete equipment production line, Including some auxiliary equipment, like cable, transformers and so on.