Trowel
Specifications: 1) Operating weight: 88kg ; 2) Measurement (L x W x H): 875 x 500 x 965mm ; 3) Baseplate size (L x W): 500 x 585mm ; 4) Forward and reverse speed: up to 25m/min ; 5) Gradeability: up to 30% ; 6) Compaction area: up to 905 square meters/h ; 7) Compaction depth: up to 300mm ; 8) Vibration frequency: 6,000/min ; 9) Centrifugal force: 15kN ; 10) Engine model: Honda GX160 ; 11) Gearing: recoil ; 12) Rate of rotate speed: 3,600rpm ; 13) Engine power: 6.6kW ; 14) Engine lubrication vol.: 3.7L ; 15) Fuel consumption: 1.2L/h. Specifications: 1) Working weight: 74kg ; 2) Measurement (L x W x H): 1,810 x 915 x 916mm ; 3) Trowel diameter: 910mm ; 4) Blade quantity: 4 ; 5) Speed range: 70rpm-135rpm ; 6) Engine model: Honda GX160 ; 7) Gearing: recoil ; 8) Engine power: 4.1kW ; 9) Engine lubrication vol.: 3.7L ; 10) Type of fuel: unlead gas ; 11) Rate of fuel consumption: 1.2L/h.

Tile Forming Machine
1) Consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table ; 2) Material spec: colored and galvanized steel sheet at yield stress 33KSI ; 3) Thickness of coil sheet: 0.5 - 0.6 mm ; 4) Coil width: 1000mm ; 5) Working speed: 3.0 - 4.0m/min (step distance at 380mm) ; 6) Power requirement: a) Main motor power: 7.5kW ; b) Hydraulic station power: 5.5kW ; 7) Passive uncoiler max. capacity: 5,000kg ; 8) Quantity of stands: 15 groups ; 9) Controlling system: PLC ; 10) Type of cutting: roll-formed and length-set cutting ; 11) Machine dimension: about 18,500 x 1,500 x 1,400mm ; 12) Total weight: about 9,500kg ; 13) Voltage: 380V 3 phase 60Hz or at buyer's requirement ; 14) Working flow: decoiling the sheet-sheet guiding-film covering-roll forming-measure length -pressing-cutting the panel-panels to the supporter

Hydraulic Drill Carriage
1) Energy saving ; 2) Decreases drilling costs ; 3) Reduced noise ; 4) Efficient caterpillar tread ; 5) Engine power: 102kW ; 6) Rotational speed: 2200rpm ; 7) Compressor capacity: 6cbm/min ; 8) Pressure: 7Bar ; 9) Traveling speed: 1.5 - 2.5km/hr ; 10) Climb ability: 30° (max.) ; 11) Drilling depth: 20m ; 12) Shank switching: manual or automatic ; 13) Hole range: Φ76 - Φ100 mm ; 14) Drilling speed: 1m/min

Wheel Loader
Specifications (ZL30H): 1) Operating weight: 10,200kg ; 2) Rated power: 87kW Cummins engine ; 3) Standard bucket capacity: 1.7cbm. Specifications (ZL40H): 1) Operating weight: 13,200kg ; 2) Rated power: 126kW Cummins engine ; 3) Standard bucket capacity: 2.3cbm

Heavy Duty Paint Mixer
1) Heavy duty type ; 2) Size: Ø210 x 10 x 615mm ; 3) Zinc plated

Sandwich Panel Production Line
Sandwich panel production line is the main equipment that is used to produce sandwich panel - a new building material which has the features as stable, light, solidity and beautiful appearance. The application of sandwich panels in various usage of large-scale house like supermarket, workshop, and warehouse is convenient and fast in building. They also can be offered to construct refrigerators, and clearing rooms. Specifications: 1) Dimensions: 38,000 x 2400 x 2700mm ; 2) Weight: 16,000kg ; 3) Total power: 28kW ; 4) Production rate (m/min): 0-4.5 (foam) ; 5) Plate material: color steel or stainless plate ; 6) Material thickness: 0.3-0.8mm ; 7) Core material: EPS, rock wool and glass wool ; 8) Core thickness: 48-298mm

Concrete Curb & Paving Stone Forming Machine
1) Profile dimensions: 750 x 750 x 1810mm ; 2) Max. pressure: 1,000kN (100t) ; 3) Rated pump pressure: 31.5Mpa ; 4) Max. piston journey: 200mm ; 5) Piston rod descending velocity: 8mm/s ; 6) Piston rod ascending velocity: 16mm/s ; 7) Marginal distance between piston and work table: 150 -230mm ; 8) Motor power: 4kW ; 9) Mainframe weight: 1.75 tons ; 10) Size and output per shift (paving stones): 250 x 250mm; 3,200pcs

Colored Steel Tile Forming Machine
1) Machine dimensions: 20 x 1.5 x 1.4m ; 2) Weight: 11500kg ; 3) Controlling system: PLC ; 4) Main motor power: 4kW ; 5) Hydraulic station power: 5.5kW ; 6) Nodal distance: adjustable according to requirement (>250mm) ; 7) Working speed: about 1500mm/min. The colored steel tiles produced by this line look beautiful, elegant and noble. They are widely used as roofing for garden-like factories, hotels, exhibition centers, villas etc.

Impact Crusher, Vibrating Feeder, Single Toggle Jaw Crusher
Features: PF impact crusher: 1) Crusher has features of greater crushing ratio, the product after being crushed in a cubical shape ; 2) It is suitable for crushing materials with edge length up to 100-500mm, compression strength up to 350mpa. ZSW vibrating feeder: 1) The feeder series is a kind of liner direction vibration feeder ; 2) It makes a feature of smooth vibrating, reliable in operation, long service life ; 3) It is suitable for feeding material into the crusher while screening away soil contained in the raw material ; 4) They are widely used in mining, building material, silicate and chemical industry in the crushing and screening equipment ; 5) It also can be applied to the feeding of jaw crusher series. Single toggle jaw crusher: 1) The series of single toggle jaw crusher makes a feature of great crushing ratio, uniform sizes of performance, easy maintenance and less operating cost 2) It is widely used in mining, metallurgical industry, building material, highway, railway, water conservancy and chemical industries ; 3) Various materials with compressive resistance less than 320mpa can be crushed.

Bulldozer
1) Engine: Cummins NT855-C280 turbocharged diesel engine ; 2) Running gears and longer track length ensures better stability ; 3) Air conditioned hexahedron cab has wide horizon, driving comfort and good appearance ; 4) Integrated electronic monitoring system has highly sensitive and direct monitoring audio and optical alarm functions ; 5) Driver's seat angle and height can be automatically adjusted ; 6) Ergonomically designed operation system creates convenient and relaxed operation conditions ; 7) Independent overturn protection device improves operational safety ; 8) Attachment: straight blade, U blade, angle blade, single-tooth and three-teeth ripper ; 9) Transmission parts and wearing parts manufactured using military techniques ; 10) Possesses high strength, toughness and anti- wearing properties

Electric Tile Cutter
1) Blade diameter: 180mm ; 2) 230V/50Hz, 450/600/720W ; 3) No load speed: 2,990r/min ; 4) Max. cutting depth: 34mm ; 5) Chrome plated table ; 6) Table size: 385 x 395mm ; 7) Overload protection ; 8) Magnetic switch

Power Trowel
Features: 1) Over-built gearbox assures long service life ; 2) Heavy-weight design to assure a superior finish ; 3) Height adjustable handle, quick adjustment on the site, no need any tools, assures operation comfort & ease control ; 4) Lifting bar as standard feature allows trowel to be transported on the job-site with only two people ; 5) Centrifugal safety switch shuts the engine down in the event of the operator losing control of the unit ; 6) Screw control ensures precise blade adjustment. Specifications: 1) Engine: air-cooled, 4-stroke, single cylinder, Honda GX160 ; 2) Power: 4.0kW (5.5HP) ; 3) Weight: 75kg (165 lbs) ; 4) Rotor diameter: 90cm (36") ; 5) Number of blades: 4 ; 6) Finish blades: 15 x 35cm (6 x 14") ; 7) Combination blades: 20 x 35cm (8 x 14") ; 8) Clip-on float shoes: 25 x 35cm (10 x 14") ; 9) Pans: 98cm (38 1/2") ; 10) Dimensions: 100 x 100 x 50cm (40 x 40 x 20")

Rolling Forming Machine
1) Hydraulic sysyetm to expand coil inner hole, pump motor: 3.0KW ; 2) Frequency Inverter to regulate turn speed, motor: 2.2KW ; 3) Automatic stop device, load capacity = Max. 6MT ; 4) Coil inner diameter = 470 - 560mm, coil width = Max. 1,250mm ; 5) The decoiler have 2 main types: automatic type and maunal type ; 6) We can give the diferent number (based on the weight the decolier can get for each decoiler such as 5 ~ 7MT

QF Series Concrete Block (Brick, Paver) Molding Machine
Features: 1) Full hydraulic drive ; 2) Double feed ; 3) Organic combination of press and vibration ; 4) Double control of height and density ; 5) Small cubage ; 6) Strong excited force ; 7) Simpe operation ; 8) Convenient maintenance ; 9) Reliable function ; 10) Economical, practical and advanced machine ; 11) Can manufacture color pavers, lawn pavers, small concrete hollow blocks, thin wall hollow blocks, kerb bricks, lattice wall blocks, tree-well bricks and slope protection blocks, etc. which can be widely used in varoius constructions ; 12) Has series from single machine to automatic production line. QF 3-35 specifications: 1) Box dimension (L x W x H): 660 x 540 x 200mm ; 2) Quantity of molding brick: a) S-style interlocking paver: 10 ; b) Block: 3 ; 3) Molding cycle: 25 - 35 sec/ cycle ; 4) Production: 200 - 250sqm, or 30- 200cbm ; 5) Vibration frequency: 75 - 85Hz ; 6) Power: 11.5kW ; 7) Weight: 3MT ; 8) Overall dimensions (L x W x H): 4,000 x 3,500 x 2,300mm

Circular Saw
1) Voltage/frequency (V/Hz): 110V - 220V/50/60Hz ; 2) Input power: 900w

Glass Straight-Line Edging Machine
DE242A straight edging machine is applicable for grinding straight edge of
flat glass of different size and thickness. The straight side can be grinded to
be flat and vertical to the surface of the glass. It can bevel the arris of the
straight edge to angle of 45. The rough grinding, fine grinding, polishing for
flat edge and arris beveling can be finished at one traveling. Continuous
processing can be taken for glass of the same thickness. The shininess of
the glass edge surface after being processed will be almost the same as the glass flat surface. Specifications: 1) Min workable dimensions: 120 x 120mm ; 2) Arris angle: 45^o ; 3) Glass thickness: 3 - 28m ; 4) Processing speed: 1.0-5.2m/min ; 5) Number of wheels: 8 ; 6) Power: 16.3kW ; 7) Overall dimensions: 6600 x 1200 x 2520mm ; 8) Weight: 2620kg

Sink Cutting Machine
The sink cutting machine is for making counter tops, vanitry tables and so on. Our machine is good in quality and reasonable in price. Beisdes, we can also provide bridge saw machines, edge grinding machines and all the necessary tools.

Grinding Mill, Pulverizer, Powder Making Machine
These machines are used to grind barite, limestone, kaolin, ceramics and slag, whose Moh's hardness is below 9.3 scales. Features: 1) All stuff is non-inflammable and non-explosive ; 2) Product size is adjustable in the range of 80 - 425 meshes ; 3) Compared with Raymond Mill, it has thinner grinding rate ; 4) Better design which reduces cost. Models available: a) Number of roller: 3 ; b) Diameter of roller: 260mm ; c) Height of roller: 150mm ; d) Inside diameter of ring: 780mm ; e) Height of ring: 150mm ; f) Max. feeding size: 15mm ; g) Fineness of product: 0.613 - 0.033mm ; h) Capacity: 0.28 - 3.0MT ; i) Total power: 35.7kW ; j) Dimensions: 4300 x 3500 x 5100mm

Steel Reinforcement Breaking Machine
1) Breaking capacity: round steel: <450MP, diameter: 6-40 ; 2) Screw-thread: grade II steel, diameter: <32 ; 3) Breaking frequency: 32 times/min ; 4) Power/voltage: 3kW/380V ; 5) Dimensions: 1,190 x 450 x 680mm ; 6) Machine weight: 495kg

Plate Compactor
1) Engine: HONDA ; 2) Available in sandy soil, clay soil and mixed soil specifications ; 3) Easy startup in cold weather ; 4) Low operating weight and easy operation