WWL-LDG
High and Constant Voltage DC Power Supply
1) Over 250 models available. 2) Range: 0~(800V-50kV), 0~(0-10A),
0~(0-6kW) optional. 3) Automatically exchanges between constant
voltage mode and constant current mode. 4) Low ripple and noise
rate. 5) Fast response. 6) Constant current can be checked or set
during operation. 7) Low input current, high reliability, higher
efficiency and less line distortion due to the choke input
circuit. 8) Over voltage protection unit (OVP) is equipped as
standard. 9) Output on/off switch. 10) Remote sensing terminals
option. 11) Operating status is indicated by LED. 12) External
analog control option. 13) 16 bit D/A card for PC ISA (optional).
14) Typical applications: semiconductor capital equipment,
vacuum-processing equipment, including magnetron sputtering,
ion/electron beam sources, medical imaging and therapeutic
devices, analytical instrumentation for drug discovery technology
and particle accelerators. TSGC
Series Contact Voltage Regulator
The voltage regulator is in the structure of adjustable
compensator. It winds a coil on the loop core, with thee brushes
coinciding with the rubbed surface of the coil closely under the
spring pressure effect. It rotates the revolving shaft to drive
the brush stand, and make the brush move along the coil surface
to change the contact position of the brush. That means change
the turning rate of primary and secondary coil, which can make
the output voltage steplessly adjusted within the adjustment
range. It has the advantage of no waveform distortion, small
volume, lighter weight, high efficiency, simple and reliable
operation, and long service life..
Fully
Automatic Voltage Stabilizers
This product has TND single phase stabilizer (from 0.5kVA up to
30kVA) and TNS three-phase stabilizer (from 3kVA up to 60kVA) .
TND fully automatic voltage regulator consists of contact voltage
regulator, sampling control circuit and service motor as well. It
has excellent features, such as small waveform distortion, high
efficiency, and high power factor, free from the effect or
frequency variation of supply. It can be widely used in most
situations where the voltage stabilization is required. TNS
three-phase fully automatic voltage stabilizer is in combination
with SVC stabilizer. The incoming power of the power network is
three-phase four-wire system. The output power network is also
three-phase four-wire with three electric meters to indicate
three phases separately, and a shift switch and voltage meter to
shift and survey each phase. It is used in such sites as
computers, testing equipment, lighting system, security warning
systems, radial apparatuses, communication systems, medical
equipment, duplicating machines, stereo sound sets, industrial
robots, laboratory apparatuses, controlling machine tools,
industrial automation equipment, TV sets and Hi-Fi equipment.
PVC
Stabilizer
PVC processing aid acr zb 401 is the latest achievements in
scientific research of our factory and higf-quality PVC
processing improving agentresearched on the basis of several same
kinds of products. It`s properties are allbetter than the same
kinds of processing aid. It can be used in processing of
complicated special shapes and calendaring. It can decrease fish
eyes and crystalpoints of transparent products and be for the
second forming. It can improve the processing properties of
rigid, semi-rigid and soft PVC products
Electric
Power Stabilizer
1) High efficiency ; 2) Low power loss ; 3) Waveform aberrance
stabilizing ; 4) Short time emergency ; 5) Wide range Adjustable
voltage ; 6) Safe and reliable operation Voltage
Regulator / Stabilizer TNS Series
These stabilizers are composed of a main coils and compensate
coil ensure the most reliable output supply. With by-pass
function, under and over voltage protection and delay function
which will ensure the perfect performance of the
appliances. Specifications: 1) Input voltage:
176-264V ; 2) Output voltage: 220+/-3% ; 3) Frequency: 50Hz /
60Hz ; 4) Low voltage protection: 184V+/-4V ; 5) Over voltage
protection: 246V+/-4V ; 6) Delay output time: 3-7min/3-7sec
Three-Phase
Stabilizer / Voltage Regulator
When the voltage fluctuation of outside power-supply network or
the load change causes the voltage to be fluctuated, it can
automatically keep the output voltage stable. Compared with the
other stabilizers, the serial products have the advantages of
large capacity, high efficiency, no waveform distortion, stable
voltage control and so on. Furthermore, the serial stabilizers
own the wide service load, the capacity for being the momentary
overload, long-term continuous operation, the switching for
manual an automatic operation, the protection against the over
voltage, over current, phase shortage, phase-sequence and the
automation protection, So they are widely used in the equipment
of the large electromechanical, t he metal processing,
constructional engineering, embroidery textiles, and production
flow-line, electrical lift, medical apparatus and instruments,
air-conditioner, broadcast television, household appliances,
lighting etc. in the line of industry, agriculture,
transportation, post and telecommunications, military affairs,
railway, and scientific research culture. Service occasions:
widely used in the fields of post office, store, elevator,
hospital, school, publishing house and stock exchange where
normal voltage is in need, and also can be used in the factories
of large and middle-scale industrial and mining corp. It is very
much suitable for some important devices and supporting single
machine.
Three-phases
Stabilizer
These stabilizers supply with more stable and precision output,
meanwhile with super power supplied. Composed of a contact type
self-coupling voltage regulator, automatic sampling control
circuit and an independent servomotor make it most reliable. With
by-pass function, under and over voltage protection and delay
function which will ensure the perfect performance of the
appliances. Specifications: 1) Input voltage: 304-456V ; 2)
Output voltage: 380+/-(3-5)%, 220+/-(3-5)% (only for DBW) ; 3)
Frequency: 50Hz / 60Hz ; 4) Over voltage protection: 426V+/-7V ;
5) Low voltage protection: 318V+/-7V
Single-phase
Stabilizer
1) Automatic voltage regulation ; 2) Dual voltage (110 / 220V)
compatible ; 3) Short circuit protection ; 4) Voltmeters indicate
line voltage and regulated voltage ; 5) Re-settable circuit
breaker ; 6) Global voltage customization: 220V, 230V, 240V,
110V, 115V, 120V
AC
Automatic Voltage Regulator
Specifications: 1) Latest multi-step automatic voltage regulator
; 2) Built-in surge, spike and lightning protection ; 3) Internet
line and lightning (RJ 45) protection ; 4) EMI / RFI filter ; 5)
Overload and overheat protection ; 6) Output meter and multi-LED
indicator ; 7) Big capacity transformer 500VA ; 8) 4 / 5 output
socket. Primary technical parameters: 1) Input voltage: AC 170 -
260V, 50 / 60Hz ; 2) Output voltage: AC 220V±5% ; 3) 50 / 60Hz (Sineware)
; 4) Power rating: 500VA ; 5) Output efficiency: 95% ; 6) Maximum
current: 5A ; 7) Maximum surge current: 4,500A (8/20 US) ; 8)
Energy transient: 100J (2ms)
AC
Voltage Stabilizer
The stabilizers are composed of contact type self-coupling
voltage regulator, automatic sampling control circuit and a
servomotor. With soft-start function, under and over voltage
protection and delay function which will ensure the perfect
performance of the appliances. Specifications: 1)
Input voltage: 140-260V ; 2) Output voltage: 220+/-3%, 110+/-6% ;
3) Frequency: 50Hz / 60Hz ; 4) Over voltage protection: 246V+/-4V
Voltage
Stabilizer, Voltage Regulator
TND series high accuaracy full-automatic AC voltage stabilizer,
SJW series three-phase high accuaracy full-automatic AC voltage
stabilizer, DBW/SBW series high power compensation single/3-phase
voltage stabilizer, JJW series precision purified AC voltage
stabilizer, TZK series domestic air conditioner AC voltage
stabilizer, WYJ series DC power supply, HDN series inverted power
supply, TDGC series contact voltage regulator available.
LDO
Voltage Regulators
Applications: 1) battery powered equipment ; 2) palmtops ; 3)
portable cameras and video recorders ; 4) reference voltage
sources. Features: 1) cmos low power consumption: Typical 3.3ua
at vout=5.0v ; 2) output voltage range:2.0v to 6.0v in 0.1v
increments ; 3) highly accurate: Output voltage + 2% ; 4) maximum
output current:250ma (within the maximum power dissipation, vout=5.0v)
; 5) small input-output voltage differential: 0.12v at 100ma and
0.38v at 200ma ; 6) input stability: Typ.0.2%/v ; 7) package
available: Sot- 23 (150mw), sot- 89 (500mw) & To - 92 (300mw)
Energy
Saving AC Automatic Voltage Regulator
Compact size, light weight. 'ZNYI' brand compact size AC
Automatic voltage regulator, servo motor type and electronic
relay type.500VA and 100VA.
Servo
- Motor Type Voltage Stabilizer
We are A famous company of electrical field, our mainly products
are automatic voltage stabilizer, servo-motor type, from 350watts
to 20,000watts. At present we produce 10,000pcs/month and price
is very good. Any demands from you will mostly noticed and soon
reply.
AC
Voltage Stabilizer
The soft-start function, under and over voltage protection and
delay function
will ensure the perfect performance of the appliances.
Specifications: 1) Input voltage: 140-260V ; 2) Output voltage:
220+/-3%, 110+/-6% ; 3) Frequency: 50Hz / 60Hz ; 4) Over voltage
protection: 246V+/-4V
Blow
Off Valve, Voltage Stabilizer, Voltage Controller
We are a leading manufacture of Auto Accessories inTaiwan. Our
products are alwasy have the excellent quality. We supply oil
cooler, intercooler, blow off valve, oil catch tank, spacer,
wheel lug nut, pulley, voltage stabilizer, boss kit, steering
wheel, quick release, adapter, t-joint, vertical door, ashtray,
bolt, knob, baby timer, strut bar, control arm, cam gear, camber
kit...etc.
DC
Power Supply Stabilizer
The DC power supply is an automatic
constant-voltage/constant-current transfer type power supply with
display meter or electrical point meter. Constant voltage output
is adjustable from 0-30V/60V and constant current output is
adjustable from 0-1A/2A/3A/5A to 0-10A/20A/30A/50A. The output
type may be one or two with fixed 5V3A and can be connected in
parallel or series to obtain multiple output currents or
voltages. Specifications: 1) Input voltage: 220V ± 10% ; 2)
Frequency: 50 ± 2Hz ; 3) Output voltage: a) Continuous adjusting
DC: 0-30/60V ; b) Fixed DC: 5V3A (3 branches) ; 4) Output
current: a) Continuous adjusting DC: 0-1A/2A/3A/5A ; b) Fixed DC:
0-10A/20A/30A/50A ; 5) Protection: current limited protection ;
6) Power effect: a) CV =< 1 x10-4+5mv ; b) CC =<
3 x 10-4+10mv ; 7) Load effect: CV =<1 x10-4+2mv
; a) Output current =<3A CV =<1 x10-4+5mv ; b)
Output current > 3A CV =<1 x10-4+10mv ; 8)
Ripple and noise: CV =<1m Vrms ; 9) Relative temperature:
0~+40°C ; 10) Relative humidity: 20-85%
AC
Fully Automatic Triphase Compensation Voltage Regulator
Features: 1) These stabilizers supply with more stable and
precision output, meanwhile with super power supplied ; 2)
Composed of a contact type self-coupling voltage regulator,
automatic sampling control circuit and an independent servomotor
make it most reliable ; 3) With by-pass function, under and over
voltage protection and delay function which will ensure the
perfect performance of the appliances. Specifications: 1) Input
voltage: 304-456V ; 2) Output voltage: 380+/-(3-5)%, 220+/-(3-5)%
(only for DBW) ; 3) Frequency: 50Hz / 60Hz ; 4) Over voltage
protection: 426V+/-7V ; 5) Low voltage protection: 318V+/-7V.
|