Pulley Bearings
1) Materials: chrome bearing steel, carbon steel, stainless steel. 2) Type: open, RS, 2RS, Z, ZZ. 3) Specifications: 604-6009, 624-6208, 634-6308, 684-6808, 694-6908. 4) Tolerance: ABEC-1, ABEC-3, ABEC-5, ABEC-7. 5) Vibration: blank, V1, V2, V3. 6) Clearance: blank, C2, C3, C4, C5. Applications: These bearings are used as furniture fittings for such products as sliding doors, windows, cabinets, cupboards, electrical household appliances and other mechanical equipment.

High Alumina Ball
With pleasure to recommend to you an excellent milling media---high alumina ball for milling coating, paint, titanium dioxide pigment, etc. High alumina ball is produced with alumina material of showa denko Japan, by japanese original roll shaped technique, in abrasion-residence crystallite structure, no cracking, the abrasion is only 1/4 compared with other similar milling media. Extra-hardness could improve milling effect to a great extent.
High alumina ball is most suitable for wet milling(ballmilling or sand milling) titanium dioxide pigment into the perfect particle size(02-0.35 micron).

Open Type Ball Bearing
1) Bearing type: 68, 69, 60, 62, 63, 64, R,MR,16 series. 2) Bore diameter range: 5mm to 60mm. 3) Snap ring: N, NR. 4) Tolerance codes: ABEC-1, ABEC-3. 5) Vibration level codes: V2, V1. 6) Internal clearance codes: C0, C2, C3, C4, C5

Deep Groove Ball Bearing
Due to their versatility, single-row deep-groove ball bearings are the most popular of all anti-friction bearing types. They are available in a broad range of sizes, from miniature ball bearings with outside diameters of less than 3mm, to extra-large bearings that exceed 400mm in diameter.

Ceramic Bearings
1) Out and inner ring: stainless steel or bearing steel. 2) Ball: silicon nitride, zirconia or alumina. 3) Retainer: PTFE, nylon, PEEK or stainless. 4) Higher speed and acceleration, higher accuracy, reduced lubrication Requirements, low thermal expansion, extended operating life

Thrust Ball Bearing
Used in oil drilling machine, screw shaft of oceangoing freighter, combining driving machine, overhead crane, heavy tower crane turntable, and turntable of drilling machine

Spherical Surface Ball Bearing
1) You can adjust the center when they are installed with bearing seats, which are widely used in agricultural machinery, transporting system and construction and textile machinery. 2) Can mainly withstand the joint load of axial and radial. 3) Not suitable to bear axial load independently. 4) The main specifications are UC203 - UC210. 5) Main specification range: a) Inner diameter: 12 - 80mm. b) Outer diameter: 32 - 150mm. c) Width: 10 - 60mm

Flanged Ball Bearings
1) Applications: extra-thin type flanged bearings are used for the downsizing and lightweight designing because of thin cross section 2) Bearings with a flange on the outer ring simplify axial location 3) Many small balls are used in our extra thin type bearings, making friction torque and torque fluctuation low 4) Bore size: 1-17mm 5) Model: F682-F6803, F692-F6903, F6000, F629 ZZ NR 6) Tolerance: ABEC-1 ~ ABEC-5 7) Grease: all kinds of grease available 8) Seal: open, Z, ZZ, RS, 2RS, Teflon seals

Angular Contact Ball Bearing
The raceways of both the inner and outer rings of these non-separable bearings are made with set contact angles. The balls are inserted using counter-bore construction, which allows a larger number of balls to be installed than in deep-groove ball bearings. Single-row angular contact ball bearings can sustain radial, axial and momentary loads. However, any axial load must be applied in one direction. Typical applications: speed reducers, automotive applications, construction equipment,pumps, printing presses, paper mill machines

Ball
1) Grade: G5 ~ G1000. 2) Materials: chrome steel, high carbon steel, low carbon steel, stainless steel, ceramic, brass, etc. 3) Size: Ø1.5 ~ Ø300mm.

Four Point Contact Ball Bearing
Four row cylinder roller bearing is made of vacuum melting high-quality bearing steel with designed optimize parameter. It has reliable performance with large radial loading and high limit rotary speed, equipped with inner and outer rings. It is easy to mount and dismount. This kind of bearing is widely applied for working roll and backing roll for cold and hot rolling mill. Four point contact ball bearing is made of vacuum melting high-quality bearing steel with reliable performance and is separate bearing, equipped with double semi-circle inner and outer ring. The contact angle is 35, bearing the bilateral axial load. This kind of bearing has single row and bi-row angle ball bearing function, under low and middle speed, comparing with other bearing, four point contact ball bearing can obtain the less axial free clearance, and large load and high limit rotary speed when axial preclearance is same.

Spherical Roller Bearings
The raceways in the outer ring of this type of bearing are designed with a spherical surface, with the center coinciding with the bearing centerline. The bearings are of an improved design that incorporates modified line contact between the raceways and rollers. This construction allows the bearing to have a very heavy radial load. In addition to its excellent radial capacity, these bearings can also accept a relatively large amount of bi-directional axial loading. Spherical roller bearings can also accommodate some angular misalignment

Single-Row Angular Contact Ball Bearing
1) Single-row angular contact ball bearings with double semi-inner ring. 2) Also called guide bearings, with large loading capacity. 3) Can also bear axial load, with agile rotation, mainly used in automobile steering gear system. 4) Main specification range: a) Inner diameter: 12 - 80mm ; b) Outer diameter: 32 - 150mm ; c) Width: 10 - 50mm

Self-Aligning Ball Bearing
Self-aligning ball bearings are constructed with the inner ring and ball assembly contained within an outer ring that has a spherical raceway. This construction allows the bearing to tolerate a small angular misalignment resulting from deflection or improper mounting. Typical applications: drive (driven) shafts, conveyers, roll shafts

Bearings
1) Deep groove ball bearings. 2) Main series: 6000 series, 6200 series, 6300 series, 6800 series, 6900 series. 3) Inner diameter: 8 - 60mm. 4) The bearings can be open. 5) Widely used for the electrical household, electrical tools and machines. 6) Material: chrome steel

Angular Contact Ball Bearings
1) Dimensions: bore from 10 to 70mm. 2) Model: 5200, 5305 2RS, 7200, 7201, 7305. 3) Shield/seal: open, ZZ, 2RS. 4) Type: A, B, C, AC, DB, DF, DT

Hydraulic Bearing
1) GK..DO and GF..DO hydraulic bearings. 2) Can be also made up of a radial spherical plain bearing with two seals and rod body. 3) Clevises

Alumina Oxide Ceramic Precision Ball
1) High strength and high hardness. 2) High resistance to heat. 3) Stability, wear and corrosion resistance

Deep Groove Bearing
We supply a variety of bearings such as deep groove ball bearing, angular contact ball bearing, spherical ball bearing, self-aligning bearing, tapered roller bearing, linear bearing, ceramic bearing etc, grade ranges from ABEC-1 to ABEC-5, metal bearing material can be used as per the requirement of clients, such as chrome steel and carbon steel.

Ceramic Shafts
Applications include: 1) Domestic pumps: Domestic pumps are primarily hot water circulators (central heating pumps) used in residential and office buildings pumping hot water from a central boiler system to radiators. The pump designs usually incorporate an alumina bearing with a carbon thrust bearing. Domestic appliances such as dishwashers and washing machines often incorporate pump designs using alumina/carbon based seals. 2) Industrial pumps: Industrial pumps are used in pumping water from deep wells. These pumps often use alumina thrust bearings with a lapped or polished working face, which are ideal for this application as they mate with the carbon thrust pad

Bearing
Middle and large-sized tapered and cylindrical roller bearings; various kinds of extra large-size bearings. Among the products: Double Row Tapered Roller Bearing and Double Row Tapered Roller. Bearing gear box transmission bearings applied for Santana automobile awarded 1997 national class new product medals. Railway Axlebox Bearing authorized by the large sized bearings enjoying a dominant position in the market for its specialty

Single-Row Cylindrical Cam Roller Bearing
1. The construction of thick-walled outer ring can support a heavy radial load. 2. Impact and abrasion resistant, with fast rotation speed

Double Row Deep Groove Ball Bearing
Double row deep groove ball bearings feature higher load ratings than single row bearings, but are very sensitive to misalignments. This series have the latest design (suffixed 'B') without filling slots. Fitted with polyamide cages (suffixed 'TN') as standard, pressed steel cages are also available. However, some bearings may have filling slots that limit the ability to support thrust loads.

Zirconia Shafts
1) Used for DC fans, CPU cooling fans, high speed mechanism, navigation
and low temperature engineering. 2) With properties of good wearing resistance, low noise, convenient assembly and long lifespan. 3) Low return loss and impact resistance

Window Roller
1) For aluminum and PVC windows. 2) Materials: aluminum, nylon. We can supply both standard products

Self Aligning Ball Bearing
With two structures of bore cylindrical or tapered and retainers made of steel sheet or synthetic resins, the bearings and characteristic of their spherically formed outer ring raceways allowing for misalignment within 3° deflection between inner ring and outer ring.