|
 Lathe
Chuck
Specifications: 1) Cast Iron body lathe chuck ; 2) 3-jaw
centering lathe chuck ; 3) 4-jaw independent chuck ; 4) 4-jaw
centering lathe chuck ; 5) 2-jaw centering lathe chuck Driling
/ Milling machine
1) Rigid, rectangular table guideways. 2) Automatic spindle
feeds. 3) Motorized lifting and lowering of drill press head
Casting
Iron Machine
The 42" casting iron machine made in our company its
producing capacity. Features: 1) Speed of the chain belt:
9.2m/min. 2) Weight of casting iron block: 26kg. 3) Power of the
main motor: 45kW. 4) Speed ratio of the speed reducer: i=289.5.
5) Model: roll wheel removing type Fully
Automatic Stretch Blow Moulding Machine
1) 500% manpower saved. 2) 25% electricity saved: very small
distance between performs, and 25% more performs can be settled
in the preheater than the semi-automatic pre-heater. 3) 20%
pneumatic power saved: it adopts sector open-and-close mould
system. 4) Speeds up mould. 5) Mold open-and-close speed
increased. 6) New concept. 7) High quality and low price. 8) This
machine saves time and labor costs because 1 person can operate 5
sets of this machines at the same time Powder
Coating Equipment
The powder coating techniques is mature and widely applied in
various industries. But technical innovation never ends. With
tens of years of experiences of equipment manufacturing and
application, SanLe has developed the energy-saving heating
systems, unique multi-track one oven curing systems,
high-efficiency powder recycle systems, and simple and practical
pretreatment systems which makes SanLe to the advanced position
of coating industry. Photo shows the equipment consisting of: 1)
XT300.50 suspended conveyer. 2) Spray pre-treatment facility. 3)
Combination oven of drying and curingt. 4) Powder coating booth
and powder recycling facility. 5) Spray gun and lifter: 2 set
with 12 guns each
Spiral
Wound Gasket Machine
Flexealing metal bending machine: is one of the subsidiary spiral
wound gasket machines, which is used to bend the metal bar into
rings to process the reinforced rings of spiral wound gaskets.
Flexealing metal grooving machine: is for reinforcing ring of the
spiral wound gaskets. It is used to process the male and female
form of the reinforced rings. It also can produce large diameter
reinforced rings. Flexealing eyelet enveloping machine: is one of
the subsidiary graphite sheet gasket machines, which is used to
envelope the graphite sheet gaskets. Engine
Lathe
1) Oversized precision spindle with 80mm big thru hole. 2) D1-8
cam lock spindle nose for mounting large-size chuck. 3) Spindle
supported at 3-point by large diameter precision bearings. 4)
Chrome alloy spindle hardened and precision ground. 5) 400mm wide
bed made of fine grain high tensile cast iron. 6) Bedways
induction hardened and precision ground. 7) All gears and shafts
hardened and precision ground. 8) 4-way rapid traverse to
carriage and cross slide. 9) Automatic lubrication in headstock
and feed box. 10) Multi-disc clutch for spindle forward and
reverse rotation.
Milling
and Drilling Machine
High rigidity rectangular table guideways. Automatic spindle
feeding. Motor-driven drill press head height adjustment. +/-45°
drill press head swivel. Table surface and guilds hardened at
ultrasonic frequency Punching
Machine
1) Automatic sequin punching machine. 2) Applications: punch
sequins (colored plastic slices) of different colors and shapes
on garments, curtain and other ornaments. It is widely applied at
sectors of garments processing and embroidery of home textile and
other ornaments. 3) Adopts 200V / 50Hz AC. 4) Adjusts punch speed
at 0 - 420 times/minutes freely with friction-driving reeling
device. 5) Punch times can be set at 0 - 99,999 times at random.
6) Feed device adopts the advanced photoelectric system and
tamping device adopts the most advanced mould made of import
material which features low noise, long lifespan and quick speed.
7) Adopts fully-enclosed structure and applies advanced
plastic-spraying technology on its body and frame as well as
adopts adjustable non-fastening chassis. As a result this machine
has the characteristic of compact in structure, beautiful in
appearance, easy and safe to operate and take up little space
High
Frequency Welding Pipe Machine
1) Feeding rack. 2) Storing chamber. 3) Main machine: a)
Functions: forming, welding, cooling, diameter setting,
correcting, integration. b) Main driving: DC motor. c) Used
refined materials and made in high precision. 4) Computer
controlled saw Automatic
Pocket Spring Machine
1.CE certified, high safety, compact design, simple to install.
2.Adopt more mechanical motions rather than cylinder motions to
ensure working stability and convenient maintenance. 3.Produce
center-welded pocket springs that are trimmer and more compact.
4.No spring-upright process, avoiding pocket breakage. 5.The
structure and the motion of the heat treatment portion have been
improved to avoid miss treatment of springs. 6.Auto stop when no
material, spring choked or shield opened. Lamination
Press Line
1 Our products adopt four-column & double points structure,
with one promoted cylinder on each of the four columns. The
sliding block can be promoted in a large range on the guide
pillar by the function of the cylinders. Thus it is convenient to
change sub-dies and make some tooling maintenance. 2 We change
the traditional crankshaft connecting rod structure to crankshaft
sliding block structure of the spindle power structure of the
double points, thus it not only increase the rigidity but lay the
double power point with a farther distance, which increase the
capacity to bear eccentric load in the direction. At the other
direction of the slide, namely the direction of the forward and
backward guide way, we change the single group roller guide rail
guidance to up and down double groups roller guide rail guidance.
Because of the long distance of the up and down roller, the guide
guidance is with high precision and the capacity of the bearing
the eccentric load of the whole press of is very strong. 3 Main
parts such as pedestal, upper beam and sliding block of the press
are all precision casting formed to fluid state sand. it can keep
long-time precision, diminish the noise and make the press with a
good shape. Wire
Mesh Machine
We supply and export various wire processing machines, including
wire-drawing machine, electric galvanizing machine, barbed wire
machine and various wire mesh weaving machine to produce screen
netting, square wire mesh, window screen netting, stainless steel
wire cloth and brass wire cloth. C
Purlin Pre-Punching & Post Cutting Machine
1) Dimensions: 9,800 x 1,500 x 1,200mm. 2) Weight: 8,000kg. 3)
Motor power: 11kW. 4) Roll speed: 11m/min. 5) Thickness:
1.5-3.0mm. 6) Width: 120-300mm. 7) Height: 35-80mm. 8) Forming
step: 14 Spiral
Aluminum Flexible Tube Making Machine
This machine is specially for producing aluminum flexible ducts /
tubes / pipes with aluminum foil or metallized polyester film and
steel wire, for those places where extension, bending and
distorting connections are needed. The finished ducts can be
insulated with glass wool used in the HVAC system.
Specifications: 1) Diameter range: 80 - 600mm. 2) Raw material:
pure aluminum foil or metallized polyester film and steel wire.
3) Working speed: 30m/min. We also have another spiral aluminum
flexible duct machine with pure aluminum foil. Crimping
Machine / Cutting Machine / Skiving Machine
crimping machine: a) Capable to crimp 6-wire hose ; b) Capacity
up to 4" ID ; c) Shringage force: 720 tons ; d) Die opening
and closing: +/-34mm; e) Voltage/power factor: 380V/3-phase ; f)
Power: 5.5kW ; g) Frequency: 50Hz or 60Hz ; h) Pressure of oil
pump: 31.5MPa ; i) Dies: 15 sets ; j) Dimensions: 950mm (L) x
650mm (W) x 1,750mm (H). cutting machine: a) Application for 2 or
3 braid and 4 wiring hoses. b) Cutting hose range: ≤2"
ID ; c) Voltage/power factor: 380V/3-phase ; d) Power: 2.2kW,
1,450rpm ; e) Cutting blade: 350mm (dia.) x 2.6mm ; f) Weight:
70kg ; g) Dimensions: 700mm (L) x 500mm (W) x 850mm (H). skiving
machine: a) Cutting hose range up to 2" ID hose ; b) Power
factor: 380V/3-phase ; c) Power: 2.73kW ; d) Weight: 50kg ; e)
Dimensions: 450mm (L) x 550mm (W) x 600mm (H). hand swage
machine: a) Supply with 2pcs crimping jaws ; b) Size: 3/8",
1/2", 5/8" ; c) Crimping jaws for 3/4", 7/8" Automatic
Grinding Machine for Face
1) Outside diameter: 100 - 650mm. 2) Bore diameter: 12.7 - 50mm.
3) Hook angle: -5o ~ +35o. 4) Bevel angle
at the tooth face: ±30o. 5) Tooth pitch: 6 - 50mm. 6)
Working speed: 10 - 30Teeth/min. 7) Diamond wheel: 125 x 20mm. 8)
Grit of diamond: 180# - 400#. 9) Peripheral speed: 30m/s. 10)
Connected load: 590W/380V Colored
Steel Roll Forming Machine
1) Total motor power: 13.2kW 2) Main motor power: 11kW 3)
Hydraulic station power: 2.2kW 4) Roll station: 16 stations 5)
Forming speed: 10m/min 6) PLC control system 7) Roller material:
high-grade #45 carbon wrought steel coated with chrome on the
surface Bench
Drilling Machine
1) Model: Bench Drilling Machine. 2) Max. drilling capacity:
13mm. 3) Diameter of column: 48mm. 4) Spindle travel: 50mm. 5)
Distance spindle axis to column surface: 103mm. 6) Max. distance
spindle nose to worktable: 220mm. 7) Max. distance spindle nose
to base: 300mm. 8) Spindle taper: B16. 9) Spindle speeds range:
515-2,580mm. 10) Spindle speeds series: 5mm. 11) Dimension of
worktable surface: 165 x 162mm. 12) Dimension of base: 290 x
187mm. 13) Overall height: 580mm. 14) Motor: 180W Steel
Wire Rope Pressed Machine
The steel wire rope pressed machine is a new type machine that
has been developed by the Juli Group Co., Ltd. for making steel
wire rope slings. The press machine is widely used for wire rope
industry. It is widely used in China. This press machine with
high technology and strength can press good shapes on wire rope
slings. It has strong resistance to corrosion and exact
dimensions. It has high efficiency. It has features of small
volume, lightweight, strong durability, easy to operate and can
be applied to any task in its field of operation. It can be
applied to oil fields, ports, railways, construction and other
related fields. Tube
Groove Machine
1) Inner swelling yarage. 2) AC 220V motor. 3) Self-defined pipe
center. 4) Easy operation. 5) Can meet various demands of
beveling processing. 6) Tube inner diameter: 65 - 159mm. 7) Tube
outer diameter: 65 - 180mm. 8) Max. one-off incision: 3 - 20mm.
9) Radial journey mm/r: 0.15. 10) N.W: 22kg Aluminium
Processing, Rolling Mill
Our main product line includes aluminium continuous caster,
aluminium cold rolling mill, aluminium foil roughing and
finishing mill, aluminium foil separator, slitting line,
cut-to-length line, tension leveling line, model cutting mill and
so on. Square
Pipe Polishing Machine
1) Quantity of polishing head: 28-head. 2) Polished pipe range:
(F)75 x 45mm. 3) Max. length of polished steel: 6m, can also
produce according to your requirements. 4) Charge speed of
stainless steel pipe: 1 ~ 20m/min. 5) Diameter of main polishing
head's axis: ¢25.4mm. 6) Motor power of polishing head: 3kW. 7)
Charge motor power: 3kW. 8) Rotational speed of polishing head:
2,900r/min. 9) Outside diameter of accessory rag wheel: Φ320mm.
10) Roughness of polished surface: Ra0.8 - 0.4/min Rolling
Shutter Door Forming Machine
1) Gear/sprocket driving, 22 steps to form. 2) Main motor: 7.5kW.
3) Forming speed: approx. 12m/min. 4) Thickness: 0.4-0.6mm. 5)
Feeding width: approx. 1,000mm. 6) Electric standard:
380V/50Hz/3Ph. 7) Entry bench: un-powered, one unit. 8) Hydraulic
cutting device: one unit. 9) Stop to cut, post cut. 10) Pump
motor: 3.0kW. 11) Cutting pressure: max. 8MPa. 12) PLC control
system: one unit. 13) Control the quantity & cutting length
automatically. 14) Combined with: PLC, inverter, touch screen,
encoder
|
