Power Transmission Equipment

• Conveyor Belt

• Coupling & Pulley

• Gear, Speed Reducer

• Motors & Engines

Power Transmission Equipment Products and Supplier, Manufacturer

Shaft Coupling
Precision parts are standard or non-standard. Customized design available. Material: metal, nonmetal. Made in china.

Drag Chains
1) Faster moving speed. 2) Allowable temperature: -40°C - 130°C or above. 3) Colors: black, red, yellow, white.

Coupling
With advantages of good elasticity, high strength and corrosion resistance, the metal membranes are made of vulcanized stainless steel. They are used to transmit torque for all kinds of manifold devices to compensate axial, radial and angular misalignments due to the errors in manufacturing, mounting and temperature variation.

Diesel Engine
Specifications: 1) Engine type: air-cooled, 4-stroke OHV, single cylinder. 2) Bore x stroke: 86 x 70mm. 3) Engine speed: 3,000rpm / 3,600rpm. 4) Max. torque: 2.7N.m / 2,800rpm. 5) Displacement: 406ml. 6) Max. output: 8.8HP / 10.0HP. 7) Rated output: 7.7HP / 9.0HP. 8) Power take off: crank shaft or cam shaft (cam shaft PTO rpm is 1/2). 9) Starting system: recoil, recoil + self. 10) Fuel tank capacity: 5.5L. 11) Oil capacity: 1.65L. 12) Net dimensions: 470 x 417 x 494mm. 13) Overall dimensions: 500 x 470 x 553. 14) Net weight: 48kg. 15) Dry weight: 53kg

Telescopic Belt-Conveyor
1) Flexible, saves time of removing and moving. 2) Adopt two forms of hang and on ground, selectable for customers. 3) Adopt angle-variable slot idler with flexible pothook, the loading capacity is great. 4) The whole belt floats on the tunnel scaleboard, no bolt connected. 5) Its disassembly is convenient and the workload is small. 6) If the convey quantity is great, it can achieve soft start

Standard Sprocket
We can sell A type, B type and C type standard sprockets, taper sprockets, taper bush and special sprockets from china.

Spur Gear
Our size range and capabilities for spur gears: 1) Maximum pitch diameter: 500mm. 2) Diametral pitch: 3 to 25. 3) Module: 1 to 9. 4) Face width: 350mm. 5) Unground tooth: AGMA Q9. 6) Ground tooth: AGMA Q12. Internal spur gears: 1) Maximum pitch diameter: 400mm. 2) Diametral pitch: 3.6 to 25. 3) Module: 1 to 7. 4) Face width: 350mm. 5) Unground tooth: AGMA Q9. 6) Ground tooth: AGMA Q12

DC Motor
We can supply various large and medium size DC Motor. Z type DC Motors are newly developed DC Motors. They are applicable to mechanical equipment which need wide range speed regulation, such as steel mills, mine winders, ships and testing equipment. Impact and impulse generators, low voltage large current generators, motors of low moment of inertia, marine machines and traction motors, with various specifications, can also be offered.

Conveyor Chain with Attachment
We can sell short pitch conveyor roller chains with attachments, double pitch conveyor chains with attachments, long pitch meter conveyor chains, timber conveyor chains, top and side roller conveyor chains and other special conveyor chains..

Abs Gear Ring, Shaft
We have many different specifications for ABS gear ring. For example, OD 180mm, ID 165mm, HEIGHT 15MM, TOOTH 100, SALT SPRAY 72 HOURS. Also, we could provide high precision ABS gear ring as per your requirement.

Gasoline Engine
Engine type: single-cylinder, two-stroke and air-cooling. 4-engine model: 1E 32F air-cooling. Maximum power at corresponding speed: 0.75kW/6,500 to 7,000r/min. Fuel tank capacity: 700ml. Idling speed: 2,800 to 3,200r/min. Gasoline per two-cycle oil mixing ratio: 25:1. Displacement: 25.4cc. Start: pull start. Net weight: 2.7kg. Carburetor: pump-film type

Conveyer
Belt Conveyors are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material.

Flat Top Chains
1) Table top chains: a) Straight running table top chains. b) Side flexing table top chains. c) Anti-static chains. d) Multiflex chains. 2) Materials: thermoplastic, stainless steel

Three-Phase Induction Motor
1) Totally enclosed fan cooled 3-phase induction motors. 2) High efficiency, energy-saving low noise, little vibration, reliable running. 3) The mounting dimensions and power class are wholly conformed to IEC standards. 4) Series Y as conventional usage is widely used for driving various kind of machinery, machine tools, pumps, blowers, conveyers, mixers, agriculture machinery and mine machinery. 5) The power supply: rated voltage 380V, rated frequency 50Hz. 6) Insulation class B and the protection degree IP23. 7) Basic mounting type is IMB3

Adjusting Axis Parts
1> With outside diameter from 1.0 up to 32mm; 2> Made of iron, SUS, copper, aluminium, alloy steel etc. 3> Widely used in various precise machines such as test machine, gradienter, balance, scale, medical instrument, agricultural equipment etc.; 4> Flexible designs and excellent function; 5> Packing with inner plastic bags and outer cartons.

Arc Tooth Double Timing Belt
1) Material: CR rubber, nylon cloth, fiberglass. 2) Type: HTD5M, HTD8M, HTD14M, S5M, S8M, S14M. 3) Max. width: 200mm

Tubular Motor
1) Voltage: 230V. 2) Input power: 230W. 3) Current: 0.1A. 4) Speed: 17rpm. 5) Torque: 20Nm. 6) Working duration:≥4min. 7) Insulation classification: B. 8) Protection classification:IP44. 9) Max. travel revolutions: 20. 10) Min. inside diameter of driving tube: ø46mm. 11) Outside dimensions: ø45 x 580mm

Cast Steel and Forged Steel Pulleys
1) Material: carbon steel, stainless steel, alloy steel. 2) Size: provide pulleys according to customers' requirements

Water-Resistant Junction
1) Threaded entry: metric. 2) Materials: parts A.C.E.F. are made of nylon 66 characterized by high fire-resistant with its flamability rating UL 94V-2, parts B and D are made of EPDM neoprene. 3) Colors: black and grey. 4) Working temperature: -40~+100^oC, the item can also endure 120^oC instantly. 5) Protection degree: IP68. 6) Standard: IEC698. 7) Installation: directly screw into hole of same thread size or fix with the spare locknut, with cable throng it inside hole, seal the sealing nut

Gear Reducer
The gear reducer was produced in the guide of PR China standard-ZBJI9004-88. This kind of product includes 3 series, they are ZDY, ZLY, and ZSY. The gear reducer series could be used in metallurgy, mining areas, convey, cement, construction, chemical industry, textile industry, light industry, energy industry. The main function is reduce the rotary speed, increase the torque.

Turned Part, Brass Connection, CNC Parts & Die Casting
1) Alnico describes a family of materials that is derived from a common base composition comprising of aluminum, nickel, cobalt and iron with various additions of other elements. 2) These magnets have slightly lower reversible temperature coefficient magnetism than other permanent magnet materials, and work excellently in temperatures up to 600^oC. 3) Alnico products are widely used in all kinds of meters and other applications. 4) Alnico magnets in the following grades: AlNiCo 3, AlNiCo 5, AlNiCo 7, AlNiCo 8 and AlNiCo 10. 5) These products can be produced in ring, cylinder, square, segment, and other shapes

Steel Reducer
We can supply deep process steel tubes and pipes in different shapes. Specifications: 1) Size range: different diameter. 2) Heat treatment: annealed, bright annealed, stress relieved, normalized, spheroidize annealed, or cold finished. 3) Light wall, heavy wall, thin size, special cutting, tight ID tolerance, small hardness range, special mechanical property, special surface

Snatch Block
1) Sheave snatch block, convenient to wind. 2) Adopts good-quality steel, safe, reliable and durable. 3) Small volume, easy to operate, maintain and repair. 4) A crane to lift and draw heavy goods. 5) Widely used for mines, wharfs, factories, construction sites, warehouses. 6) Forged hooks. 7) Bearing, bearing cover and powder cover for your choice. 8) Available in 0.5-10MT capacities

Timing Pulleys
1) Belt and pulley of our factory can be attachment or replacement of imported belt and pulley. 2) Please supply drawing when you place orders and we can also draw for clients as per their specifications, hole key way and width. 3) The material of pulley mainly composed of carbon steel; if possible, aluminum alloy and nylon can also be applied; if external diameter is larger than 250mm, iron is used

Transmission Chain
Available products: 1) Roller chains. 2) Chain with various attachments. 3) Conveyor chains. 4) Hollow pin chains. 5) Leaf chains. 6) Timing chains. 7) Flat top chains. 8) Side bow roller chains. 9) Lumber chains. 10) Agriculture chains. 11) Silent chains. 12) PIV chains. 13) Stainless steel chains. 14) Nickel/zinc plated chains. 15) Heavy duty cranked-link transmission chains. 16) Triple speed chains and double plus chains. 17) Motorcycle chains. 18) Bicycle chains. 19) Engineering chains

10kV HV 3-phase Asynchronous Motor
These products are used to drive normal machinery, such as compressors, ventilators, pumps and crackers. The power grades, mounting dimensions and performance of our products comply with national, Machinery Ministry's and IEC standards. These motors are designed using CAD tools and the windings are made of F class insulation materials and have a discharge-resistant structure. These motors are with features of high efficiency, energy saving, low noise, low vibration, less weight, reliable performance and easy to maintain.