Stream Cutting Saw
Specifications: 1) Width of saw cutting: 400mm (70mm thick). 2) Principal axis rotate speed: 2,500r/min. 3) Principal axis diameter: Ø25.4mm. 4) Saw piece diameter: Ø400mm. 5) Installation power: 3.3kW. 6) Machine dimensions: 270 x 100 x 120cm. 7) Weight: 400kg.

Woodworking Machine
1) Motor: 1,100W, 50Hz, 1HP TEFC. 2) Max. planer width: 250mm. 3) Max. cutting depth: 2.5mm. 4) Max. thickness height: 180mm. 5) Saw bench. 6) Blade size: 250 x 30 x 2.2 x 20mm. 7) Spindle molder. 8) Spindle diameter: 30mm. 9) Spindle travel: 90mm. 10) Net/gross weight: 260/290kg. 11) Vertical stroke: 0 to 80mm. 12) Lateral stroke: 0 to 140. 13) Complete unit packing size: 1,160 x 1,425 x 1,180

Precision Table Saw
Specifications: 1) Diameter of main saw blade: 250-350mm. 2) Diameter of scoring saw blade: 120mm. 3) Max. sawing height: 80mm. 4) Max. sawing length: 2,500mm. 5) Rotational speed of main saw blade: 5,000r/min. 6) Main saw blade motor: 4kW. 7) Scoring saw blade motor: 0.75kW. 8) Rotational speed of scoring saw blade: 8,000r/min. 9) Overall dimensions: 2,985 x 930 x 1,112mm

520mm Wood Splitter
1) 2,200W, 230v/50Hz, 2,850r/min, 10A, IP54. 2) 2,200W, 110v/60Hz, 3,340r/min, 19.5A, IP54. 3) Max. splitting force: 6MT. 4) Max. slog size: 520 x 250mm. 5) Machine dimensions: 97 x 28 x 45.5cm. 6) Weight: 49kg. 7) Hydraulic oil capacity: 3.1L. 8) Control handle: two

Automatic Double-End Saw-Boring Machine
automatic double-end saw-boring machine is a kind of technical machine for cutting material. Specifications: 1) Max. drilling diameter: 450mm. 2) Max. drilling depth: 70mm. 3) Max. working diameter: 15mm. 4) Max. working length: 2,200mm. 5) Max. working width: 300mm. 6) Max. working height: 90mm. 7) Min. working length: 650mm. 8) Drilling head rotating angle: 45. 9) Number of saw: 2. 10) Number of spindle: 2. 11) Saw speed: 2,840r/min. 12) Spindle speed: 2,840r/min. 13) Installation power: 8.2kW. 14) Air pressure: 6 - 8kg/cm². 15) Suitable voltage: 380V. 16) Overall size (L x W x H): 3,400 x 1,100 x 1,550mm. 17) Weight of the whole machine: 1,300kg

Precise Dimension Saw
1) Max. cutting length: 3,100mm. 2) Max. lengthways cutting width: 1,300mm. 3) Main blade specification: 300mm x 30mm. 4) Tilt angle: 0 - 45 degrees. 5) The non-load rotary speed: 3,000/4,000/5,000rpm. 6) Scriber specification: 120mm x 22mm. 7) Non-load speed of scriber blade: 8,700r/m. 8) The main motor power: 5.5kW. 9) Scriber power: 0.75kW. 10) Weight: 1,100kg. 11) Outline size: 3,400mm x 3,300mm x 1,000mm

Disc Saw Machine
1. Low noise and low pollution. 2. The section is free of burrs and powder without secondary processing.

Chain Saws
1) With two-cycle engine. 2) Special diaphragm and bulb-type carburetor. 3) Oregon or Carlton saw chain ant-kickback chain brake requirements. 4) Excellent and reliable ignition systems. 5) Oil feeding system features an automatic pump with adjuster. 6) Shock absorption system adopt spring and high intension shock absorption rubber. 7) Sprocket-type is rim, let chain assembly more succinct and convenient. 8) Chain protective and to hold-up the equipments. 9) Front handle protective equipment. 10) Power type: single-cylinder, two-stroke, air-cooling and gasoline engine. 11) Displacement: 40.1cc. 12) Rated output power and relevant speed: 1.4kW/7,000rpm. 13) Loading speed: 3,000rpm. 14) Ignition system: CDI. 15) Guide bar size: 14 to 16 inches. 16) Chain pitch: 0.325 inches. 17) Chain gauge: 0.050 inches.

Horizontal Band Sawing Machine
1) semi-auto horizontal band sawing machine is a new generation product to replace the old metal sawing machine, it is mainly used to cut ferrous and nonferrous metals, it has advantages of high precision, narrow kerfs, stable and reliable performance, simple and compact structure, convenient operation, high efficiency, energy and material saving, it is ideal equipment for blanking. 2) semi-auto band sawing machine is specially designed for mould line, featuring reliable performance, and simple operation. It is and ideal machine to cut mould block and plate. GD6528S machine is specially used for cutting and open on large sized flanges and pipes. 4) The machining speed of horizontal band sawing machine is 4 - 5 times faster than hack sawing machine, smaller narrower, it also can save electricity from 50% - 60% than hack sawing machine with the same time. 5) These kind machines with no class adjust machining speed and auto clamp work piece, auto feed-in blade, auto cut work piece and auto withdrawal, automatic working type. Operation and maintenance are very simple and convenient. 6) We also can design the especial machine as client request, such as the machine tip can be adjusted to miter cutting, can adopts programmable PLC with touching control type of controlling screen to carry out the action control to the machine

High Speed Cut-off Saw
Speed of saw spindle 3180rpm. Saw blade size 25.4x457x3.4mm. Saw spindle power 5kw. Working table size 690x660mm. Worhing table height 840mm. Workong air pressure 0.5Mpa. Overall dimensions (LxWxH) 3680x800x1280mm

Hacksaw Frames
1) Hand saws: a) PVC, TPR or wooden handle ; b) Size: 300mm, 350mm, 400mm, 450mm, 500mm, 550mm, 600mm ; c) Hardened and heat treated teeth. 2) Hacksaw frame: a) Size: 10", 12" ; b) Finishing: chrome plated, black finishing, plastic painted. 3) Firmer chisels: a) Size: 6 ~ 38mm, 1/4" ~ 1-1/2" ; b) PVC, wooden, soft TPR handle ; c) Sharpened and hardened blade. 4) Bricklaying knives: a) Sizes: 5", 6", 7", 8", 9", 10" ; b) Carbon steel or stainless steel with wooden and PVC handle

Disc Chipper
Our company can provide complete sets of wood chips production equipment, which take disc chipper as the principle equipment, including a variety of types and specifications. Consumers can choose the type according to the capacity together with grinder as supplementary equipment.

Gasoline Chain Saw
1) Max. cutting diameter: 450mm. 2) Engine type: air cooling, single cylinder, 2-stroke. 3) Displacement: 52cc. 4) Rated output power: 1,900W; 2.5HP. 5) Idling speed: 2,800rmp. 6) 2-cycle oil/gasoline mixing ratio: 1:25. 7) Fuel tank capacity: 550ml. 8) Engine oil tank capacity: 260ml. 9) General accessories: guide bar, chain, file, plug wrench. 10) Guide bar size: 20"

Woodworking Machine & Equipment
Blade diameter: max. 455mm (18"); min. 355 (14"). Max. working thickness: 110mm. Module width: 660mm. Speed of main spindle: 3,000r/mm. Feeding speed: 11-26m/min. Power of main motor: 11kW. Hydraulic pressure motor power: 20kW. Gross power: 12.52. Table size: 2,000 x 1,160mm

Sliding Table Saw
We can offer you several kinds of table saw. Saw blade bore diameter:25.4/30mm. Saw blade diameter:254mm. Main table size: 800x560mm. Motor power:3hp. Maximum depth of cut @ 0 degree:75mm. Maximum depth of cut @45 degre:60mm. Dust extraction outlet:100mm

Precision Board-cutting Saw
Specifications: 1) Max. cutting length: 3,000mm. 2) Max. extending height of major saw: 120mm. 3) Max. cutting width of vertical guide ruler: 1,250mm. 4) Possible tilting angle for saw set: 0-45 degree. 5) Diameter of major saw spindle: 30mm. 6) Diameter of major saw bit: 300/350/400mm. 7) Empty rotating speed of major saw spindle: 4,000/5,600rpm. 8) Motor power of major saw: 4kW/3kW. 9) Diameter of auxiliary saw spindle: 20mm. 10) Diameter of auxiliary saw bit: 120mm. 11) Empty rotating speed of auxiliary saw spindle: 8,000rpm. 12) Motor power of auxiliary saw: 0.75kW. 13) Weight: 1,150kg

Wood Welder
The mini type HF wood gluer also called "wood welder", is a multi-function heating machine. Its small size makes it more convenient to move, and the 2 kW power means more power saved. The HF power is automatically tuned and HF generator is air-cooled with over current protection. The curing touch with a trigger on the bar is easy to handle. Changing different shaped curing head enables it to cure different products. It is suitable for the drying of glue or glue of doors, window frames, cupboard door frames, as well as DIY furniture making or decorating.

Sliding Panel Table Saw
1. Table size: 3200x400mm. 2. Tilting angle for saw blade: 0-45 degrees; 3. Main spindle speed: 3000/4000/5000r/min; 4. Scoring spindle speed: 9000r/min; 5. Main spindle dia.: 30mm; 6. Scoring spindle dia.: 20mm; 7. Main motor power: 5.5kW; 8. Scoring motor power: 0.75kW

Mortiser
Description Mortiser. Chisel Capacity: 6-12mm (1 / 4inch-1 / 2inch). Max. Mortising Depth: 76mm (3inch). Drill Chuck Capacity: 1-13mm. Table Size: 340x150mm Wood. Table Size: 180x150mm. Base Size: 320x200mm. Spindle to Fence (max. ) : 65mm. Chisel to Table (max. ) : 120mm. Over Height: 780mm. Turn Headstock (at Degree) : 0--360degree. Motor: 230v 50Hz 370w. Spindle Speed: 1400rpm

Rip Saw
A single saw blade,but can be set from 12 inch to 18 inch saw blade.It used for trimming & cutting wooden material.

Gas Pole Saws
1) Conducting board length: 355mm. 2) Rated input power: 1200W. 3) Voltage/frequency: 110/230V-50/60Hz. 4) No load speed: 400m/min

High Frequency Level Table Clamp Carrier
The machine is suitable for assemble of wood and bamboo board. It is controlled by plcautomatically. It has advantage of high efficiencydry the glue in just 3~5 minutes, so it's more suitable for line production. Through segment heating, it can produce over-length board.

Planing And Sanding Machine
Mainly for processing solid wood board, finger-jointed board, door and flooring ect. Which of high hardness. Tech. Spec. As: Width of sanded board--40-1300mm. Thickness of sanded board--3-110mm. Speed of planing roller--36m / s. Speed of abrasive belt--18m / s, 12m / s. Size of abrasive belt--1330*2200mm. Speed of convey belt--8-30m / min. Motor power--59. 74kw. Working air pressure--0. 4-0. 7mpa

Automatic Saw
1) Large capacity up-cut saws for cutting PVC, aluminum or wood profiles. 2) 600mm (23.6'') diameter blade standard. 3) Two-hand safety control operation and enclosed cutting area offer. additional safety for saw operator. 4) Hydro-pneumatic blade feed for a smooth cut. 5) Saw table turns for cutting accurate angles from 15° - 90° - 15°. 6) Pneumatic lock for turntable miter. 7) Fixed index stops at common angles 45° (left and rights) and 90°. 8) Air service unit with F-R-L. 9) 5 Horsepower heavy-duty motor with blade brake. 10) Two pneumatic vertical clamps and two horizontal clamps standard. 11) Spray mist coolant system for aluminum cutting applications. 12) Digital read-out of miter and laser cutting guide/s (optional). 13) Material in-feed conveyors and length guides

Butt Ending Machine
At the installation of the clamber the cutting of bars in the size is possible. 1. Depth of bars, mm 100. 2. Width of bars, mm 400. 3. Engine capacity, kW 2, 2. 4. Dimensions. length, mm 1100. width, mm 1555. altitude, mm 1274