|
 Phos-Copper
Brazing Alloys
1) Good fluency. 2) Low cost. 3) Perfect performance. 4) For
resistance brazing, gas flame brazing, high frequency
inductionbrazing and furnace brazing. 5) Joint strength high and
conductivity good. 6) Flux is necessary when brazing copper or
copper alloys phos-copper-silver. 7) Brazing alloys with low
melting points have good 'wettabilty,' high strength and
toughness. 8) Ramp rate should be as quick as possible while
brazing. 9) Joints become bright gray, returning to original
copper color once dipped into a 10% sulfuric solution Welding
Machine
1) For welding PPR pipes and fittings 2) Socket fusion complete
welding 3) Used for PPR pipes and fittings of 110 - 160mm in
outside diameter 4) Movable, with wheels on the bottom of the
machine.
Welder
1) Generating and welding can be operated simultaneously, and
welding operation won't impact an influence on the waveform and
voltage of the generating operation. 2) The unit can achieve
perfect waveform of the welding voltage by utilizing IGBT and PWM
technology. Non-fluctuating welding current realizes high quality
welding operation Welding
Electrode
Specifications: 1) Type: plain, stainless, alloy, cast iron. 2)
Dimensions: 2.5 x 300mm, 2.5 x 350mm, 3.2 x 350mm, 4 x 400mm, 5 x
400mm. 3) YSE4313 (J421) equal to anvse6013 Welded
Ring
I.D. (inside diameter) rings: 1) Specified when the brazing ring
is to pre-placed on the outside of a tube 2) Little or no gap is
preferred to allow the ring to expand and fit tightly on the tube
without a substantial absence of filler metal in any area. O.D.
(outside diameter) rings: 1) Specified when the brazing ring is
to be pre-placed on the inside of a tube or fitting 2) A gap is
required to allow the ring to contract and fit tightly inside the
coupling without overlapping. Helix on I.D. rings: helix is kept
to a minimum to facilitate automatic loading and prevent tangling Welding
Helmet
1) Auto darkening helmet. 2) Model: ZTG-4. 3) Adapt to CHINT ADF
FS-B2; FS-B4; FS-B4a. 4) Material: PP. 5) Fire resistance: no. 6)
Dimensions: 340 x 230 x 200mm
DC
Inverter TIG Welding Machine
1) Advanced inverter technology. 2) Protected against overheating
and over-current. 3) Practical design: makes the power source
easy to carry, which enables use at almost any worksite. 4)
Slope-down and post-gas: provide a better result. at the end of
the weld, can avoid cracks and oxidation Stainless
Steel Welded Pipe
General pipe (straight): 1) Outside diameter: 3mm-114mm. 2) Wall
thickness: 0.2mm-4mm.3) Length unlimited. Pipe for heat exchanger
and vapour condenser: 1) Straight pipe: a) outside diameter :
16mm-32mm ; b) Wall thickness: 0.5mm-1.2mm ; c) Length: 3m-40m.
2) U pipe: a) Outside diameter: 16mm-32mm. b) Wall thickness:
over 0.5mm. c) Length of pipe feet: 40mm max. d) The ruing radius
flex: 45mm-650mm.
H-Beam
Welding Line
Specifications: 1) Suitable length of H-profile steel: 2,000 -
15,000mm. 2) Weld of H-profile steel: (thickness x width): (3 -
8) x (300 - 1,200)mm. 3) Wing of H-profile steel: (thickness x
width): (5 - 16) x (150 - 500)mm. 4) Inclination of H-profile
steel: 8 (unilateral). 5) Welding speed: 0.5 - 2m/min. 6)
Conveyer speed: 15m/min (max.). 7) Control system: Mitsubishi PLC.
Features and usage: This fully automatic line consists of a
welding machine, position-fixing machine and a conveyor. After
fixing the position for the web and two wings of H-profile steel,
the welding machine can automatically localize, clamp, adjust,
weld and transport the finished product. Products welded on this
line are widely used as the columns or beams in construction, and
are ideal section materials for steel structured buildings PPR
Pipe Welding Device
Hot welding machine uses electric melting connection with welding
dies. Put pending pipe and fitting on to the dies to heat for an
appropriate time, then take them off the dies and insert the pipe
to the fitting without circumvolving quickly. Hot welding machine
working power and diameters: 1) 600W, 20-32mm ; 2) 800W, 20-63mm
; 3) 1,500W, 75-110mm Inverter
Arc Mini-Machine
Input power voltage(V): AC 220 (single phase)1±15%. Frequency:
50/60Hz. Rate input power capacity (kVA): 4.5. No-load voltage
(V): 43. Rated output voltage(V):18. Output current range (A):
10-200. Starting arc mode:HF. Duty cycle:60%. Efficiency:85%.
Weight of machine: 8kg. Overall dimension (mm):371x155x295
Hot
Air Welder
This product also can be called welder, hot air seaming machine,
welding machine, hand welder and heat welder. Features: 1) Power:
220V, 50Hz. 2) Application: suitable for weld the advertisement
printer vinyl, tent fabric and PVC coated film of the product. 3)
The power voltage must be match with extra voltage of the welder
and close underground. 4) Forbid to use it in the water and under
wet construction place, avoid wetting. 5) Can be easy to use,
please read the specific instruction from guide book. 6) Remarks:
organization delicately and portable take it PVC
Twin Welding Hose
1) High working pressure. 2) Corrosion, aging and bending
resistance. 3) Light, wearable, easy to split, and convenient to
use. 4) It is the ideal special pipe for oxygen and ethane
welding equipment and devices Tungsten
Electrode
Tungsten electrode for TIG. Types: 1) Pure tungsten: HW11 ; 2)
Thoriated tungsten: HWTh20 ; 3) Cerium tungsten: HECe.
Specification: 1) Diameter: 0.9-8.0mm ; 2) Length: 150mm or 175mm Single
Wall Welded Steel Tube
Specifications: 1. Main use: widely used in condenser,
evaporators, refrigeration, chiller, heaters, automobile brake
system and automobile pipe laying; 2. Features: high intensity,
good plasticity, and small resistance; 3. Standard: ASTMA254-94;
4. Materials: materials can be altered according to customers'
requirements; 5. Outer diameter: Φ4.00mm-Φ10.00mm; 6.
Wall thickness: 0.5mm-1.00mm; 7. Packing: seaworthy packing Zirconiated
tungsten
Zirconiated tungsten has good performance in AC welding. It balls
up well in AC welding and has a more stable arc than pure
tungsten. Especially with excellent performance in high load AC
welding, it is not replaceable by any other electrodes. It also
resists contamination well in AC welding. Zirconiated tungsten is
most commonly used for AC welding of aluminum and magnesium
alloys. Welding
Inverter
1) Light and compact, high quality. 2) Advance arc force and
arc-starting function, sound-proof. 3) Stable arc and less
splash. 4) High welding quality function. 5) Automatic protection
of over-voltage and over-current. 6) Be able to work
continuously, it can balance automatic when voltage is waving. 7)
Adopt to all kinds of basic and acid electrode. 8) Be able to
long-distance welding all kinds of material, stainless steel,
steel, tungsten, titanium, nickel and other alloy material. 9)
Quick joint.10) With accessories. 11) Color box AC
Arc Welding Machine
Specifications: 1) High flux leakage special transformer 2) Used
for cutting and welding low alloy steel 3) Simple structure,
lightweight, small volume 4) Easy to maintain 5) Stable arc 6)
Durable, low cost 7) Welding consumables: low-carbon,
high-strength, medium-carbon, and low alloy steel Welding
Electrodes
1) Main products: a) Electric welding rods. b) M.S welding
electrodes: AWSE6013/7018. c) Stainless steel welding electrodes:
AWSE 308-16. d) Cast iron machinable welding rods: CHC308. 2)
High quality ensured by 30 years of experience.
1) Work pressure: 1.7MPa. 2) Prevent blast pattern. 3) Released
pressure: 2.2±10%MPa. 4) Linking bond: PZ28-1.814. 5) Outlet
bond: W0.885-1.814 left. 6) Diameter: φ7. 7) Weight:476g. 8)
Material:HPb59-1 Solder
We manufacture solder wire, bars, flux and miscellaneous
products. We have advanced automatic machines, and complete
chemical and physical testing instruments, in compliance with
environmentally friendly standards. We make series of lead-free
solder products, which meet all the requirements of RoHS. Welder's
Glove
1) Welder's gloves. 2) Material: cow split leather, canvas. 3)
Full lined, without line. 4) Full palm/two pieces palm. 5) Full
back/two pieces back. 6) Size: 10", 12", 14",
16" Outer
Conductor Argon-Arc Welding & Corrugating Line
This production line is mainly used for manufacturing the feeding
line connecting, the communication transmitting equipment and
transmitting antenna, jumper and corrugated outer conductor of
all kinds of RF cables to be used in mobile telephone networks.
In addition, the line is capable of manufacturing aluminum outer
conductors of CATV coaxial cables. Features: 1) Welding current
automatically follows the pull-off speed. 2) Corrugating head
speed automatically follows the pull-off speed. 3) Specially
designed forming tools to guarantee stable welding operation. 4)
Specially designed corrugating die to guarantee the electrical
properties of RF cables. 5) Specially designed electric control
panel to guarantee smooth and stable welding. 6) Scrap take-up
speed automatically follows the pull-off speed. 7) The annular
and spiral thread can be corrugated and their depth and pitch can
be adjusted. 8) Equipped with melt pool monitoring system of high
definition and amplification. 9) Equipped with efficient cooling
water system in order to guarantee continuous operation of the
line Welding
Rods
1) Rods of three main alloys: cobalt-base alloy, nickel-base
alloy, and iron-base alloy and stellite alloy. 2) Wear-resistant,
corrosion-resistant, high temperature-resistant and
shock-resistant. 3) Process: OXY, TIG, plasma welding. 4)
Diameters: 3.2, 4.0, 4.8, 6.4, 8.0mm. 5) Special requirement: no
length limited Two-Tone
Combined Welding Hose
Oxygen and acetylene hose Features: 1) Application: gas welding
with oxygen, argon and belium. 2) Structure: a) Inside bond layer
+ outside bond layer ; b) Reinforcing layer is braid fiber with
high retractility ; c) Outside bond layer is stripes, oxygen hose
is red and acetylene hose is either black or green. 3)
Temperature: -25 ~ -70 (-13°F +176°F). 4) Safety member: 3:1
(1MPa=10 bars=10kgf=143PSI). Two-tone combined welding hose
Features: 1) Application: gas welding with oxygen, acetylene,
argon and helium. 2) Structure: a) Inside bond layer +
reinforcing layer + outside bond layer ; b) Outside surface is
mill finish ; c) Reinforcing layer is braid fiber with high
retractility ; 3) Color, two-tone hose (red and green) or (red
and blue) ; 4) Temperature: -25 - 70 (-13°F +176°F) ; 5) Safety
member: 3:1 Banner
Welding Machine
Application: it can bond up disjoint flat painting surface made
of heat-melted material, such as PVC cloth, PE fabric canvas,
outdoor poster banner, plastic surface and sailcloth.
Specification parameter: 1) Alternant electric voltage:
220V/50Hz. 2) Upper limit power: 2,000W. 3) Adjustable work
temperature: 50-600oC. 4) Adjustable self-move speed:
0.8-15m/minute. 5) Whole weight: 10kg. 6) Dimensions: 400 x 300 x
280mm Welding
Accessories
1) Filer size (mm): 110 x 90 x 9. 2) Viewing area: 98 x 40mm or
90 x 40mm. 3) Light state: shade DIN3. 4) Darken state: from
DIN9-Din13. 5) Switching time: 1/20,000s. 6) Delay time: 0.6s. 7)
Power on/off: fully automatic. 8) Power supply: solar-li, no
battery change required. 9) Rate of UV: 313nm<0.00006%,
365nm<0.00006%. 10) Rate of IR: 780-1300nm <0.003%,
1300-2000nm<0.009%. 11) Eye protection: EN379 1/2/1. 12)
Weight: 400g. 13) MIG, TIG welding torch, Plasma torch and the
accessories. 14) Nozzle, diffuser, gun neck, line-feeding wheels,
contact tip, insulator, electrode, cutting tip, wire-feeding soft
pipe, plug, electrode holder of Germany type, French type,
Italy type, Japanese type, and American type. 15) Welding
glasses, eye mask, goggles, ear muffs, and welding gloves. 16)
Welding and cutting outfit. 17) Welding cable. 18) Special cable
of integrated CO2 line-pushing welding gun, special cable of
integrated CO2 line-drawing welding gun, cable of rubber
insulation and welding machine Non-copper
Gas-Shielded Welding Wire
New discoveries that result in our welding wire with less
spattering and easy slag removal. Wires with excellent arc
stability and smooth wettability that produce a beautiful bead,
spool after spool. Our products are confirmed by BV, NK, CCS, GL,
ABS, DNV, LR. We can also supply different kinds of Gas-Shielded
Welding Wires, Submerged Arc Welding Wires, Flux-Cored Welding
Wires, Etc. Welding
Torch Part
1) High quality. 2) Suitable for many types of torches. 3) Parts
for MAG/MIG and TIG torches are available. 4) Various parts of
welding torches: nozzles, insulators, contact tips, gas
diffusers, swan necks Cold
Heat Soldering Tool
1) Heats and cools almost instantly-reaches 800°F in about 1
second. 2) Very safe-tip hot only during active soldering cools
almost instantly. 3) The cold heat soldering tool will perform
with regular, lead free or silver-based solder 18 AWG to 24 AWG.
4) With best performance between 18 AWG and 20 AWG. 5) Cordless /
battery operated. 6) Uses 4 replaceable alkaline AA batteries. 7)
Create over 700 solder joints per battery pack. 8) Tip heat
indicator (red light). 9) Independent lighting function. 10)
Convenient carrying case included. 11) Includes cold heat
soldering base, split, bevel tip convenient carrying case Solder
Paste
Specifications: 1) We produces Lead-free solder wire and bar
including Sn/Cu, Sn/Ag,Sn/Sb, Sn/Ag/Cu, Sn/Ag/Bi alloys. 2) We
supplied various specifications of solder tin wire, different tin
content and wire diameter from 0.3mm to 9.0mm. 3) Solder tin
paste is the most important joint material for modern printing
wring board and surface makeup technique (SMT).It is
determinative factor for ideal and steady soldering effect that
chooses appropriate tin paste. Its alloy composition and content
and flux type should be concerned. Variety: No-clean solder wire
; Solid-cored solder wire ; Dim solder wire ; High-temperature
solder wire ; Low-temperature solder wire ; Nickel-plated solder
wire ; Water-soluble solder wire ; Flux-cored solder wire ;
Solder wire for lamp holder
|
