|
 Ferro
Silicon
We are supplying comprehensive raw materials of welding flux. The
specs for ferrosilicon shows as below: Si (%): 43.0-46.0 or
72.0-75.0 ; C (% max): 0.1 or 0.08 ; P (% max): 0.04 ; S (% max):
0.03 ; Mn (% max): 1.0 or 0.3 ; Al (% max): 1.0 or 2.0 Ferro
Vanadium, Manganese Ferro Silicon, Silicon Metal
1) Ferro vanadium. 2) Ferro titanium. 3) Silicon metal 441, 553.
4) Magnesium metal. 5) Magnesium ferro silicon. Made in china.
Crushed
Ferro-Titanium Powder
1) Ferro-titanium 30% powder: a) Ti 28-32% ; b) Al max.8.0% ; c)
Si max.4.0% ; d) C max.0.1% ; e) P max.0.04% ; f) S max.0.04% ;
g) Fe bal. 2) Size distributions: a) +400 microns: 0%; b) +315
microns: max. 2% ; c) -315 +200 microns 15 - 25% ; d) -200 +160
microns 15 - 25% ; e) -160 +100 microns 15 - 25% ; f) -100 +63
microns 10 - 20% ; g) -63 +45 microns 5 - 15% ; h) -45 microns 10
- 20% ; i) Bulk density: 2.65 - 3.10g/cbcm ; j) Moisture: max.
0.1% Metallic
Fiber (Stainless Steel Fiber)
1) Raw material: stainless steel 316L. 2) Antistatic
applications: stainless steel fibers in different length,
eventually blended with polyester, wool or other fiber. 3)
Electro magnetic applications: a) Optimized stainless steel load
of thermoplastic granulates, based on PP or PPS ; b) 1,800
filaments roving, impregnated or not ; c) Magnetic or
antimagnetic alloys on requests. 4) Physical parameters: a)
Exceptional adaptability whilst still offering those properties
specific to stainless steel ; b) softness and flexibility ,very
smooth surface ; c) Corrosion-resistance ; d) High tensile
strength ; e) Crease resistance, electrical conductivity and
Magnetic properties ; f) 100% recyclable ; g) The unique
cross-section of the fibers has been developed to optimize both
the suppleness of the fabrics and the specific exchange surface
making it suitable for antistatic as well as high performance
filtration applications
Cr20Ni80
Wire
The main chemical composition is Cr and Ni. The max. continuous
service of element is 1150. The density is 8 4g/cm3.
The melting point is 1,400. The elongation is 20 at least. The
resistivity is 1.09 - 1.14 at 20°C. It can be used for making
heating element and resistor in metallurgical industry,
electrical appliance and machine building industry High
Carbon Ferro Manganese
High Carbon Ferro Manganese. Specs: Mn: 73-78% . SI: 1. 5% max.
P: 0. 3% max. C: 7. 5% max. S: 0. 04% max. Size: 10-50mm 90% min.
Original: China Aluminum
Extrusion
Specifications: 1) Aluminum sleeve hourglass and stop button ; 2)
Din3093 oval sleeve ; 3) Aluminum box, channel section ; 4)
Aluminum T bar, tube section ; 5) Aluminum flat bar and beam
section ; 6) Material : aluminum alloy Ferrosilicon
1) commodity: Ferrosilicon. 2) specifications: Silicon:72% -
75.00%min ; Al:2.00%max ; C:0.20%max ; S:0.03%max ; P:0.035%max.
3) size:25-150mm. 4) packing: In 1000kg jumbo bags..
High
Carbon Ferro Chrome
1) Available products: stainless steel and spring steel. 2)
Specification: a) Cr: ≥60% ; b) C: ≤8.5% ; c) Si:
≤3% ; d) P: ≤0.03%, ≤0.018% ; e) S:
≤0.04%. 3) Size: 10-100mm, 90%min / 10-50mm, 90% Silicon
Carbide
Can supply Silicon Carbide lumps. Silicon Carbide grains, Silicon
Carbide powder and other products, the Silicon Carbide lumps
detailed specification as follows:1. Silicon carbide in lumps.
CHEMICAL ANALYSIS CRYSTAL SHAPE HEXAGONAL SICSpecial Grade MOHS
HARDNESS 9.15SIC:98.0MIN, DENSITY 3.20/CMF. C.:0.3MAX CRYSTAL
COLOUR BLACKFE2O3:0.5MAX Mould
Powder/Flux
Our products include: 1) High-carbon billet mould powder ; 2)
Ultra-thin slab mould powder ; 3) Mould powder for start casting
; 4) Mould powder ; 5) Steel slab mould powder ; 6) Low Carbon
alkalescence covering agent ; 7) Granule non-carbon alkalescence
heat-preservation flux ; 8) Special form slab flux ; 9) Plain
carbon slab flux ; 10) Ultra-low carbon slab flux ; 11)
Machine-made granule flux ; 12) Special flux for pre-fusion
Ferrous
Titanium
Ferro-Ti is made by "TiO2" and scrap.
Scrap's stabilization is better than TiO2. Tio2:
1) Ti: min. 70%. 2) Mn: max. 1%. 3) V: max. 1.5%. 4) Si: max.
1.5%. 5) S: max. 0.03%. 6) C: max. 0.22%. 7) P: max. 0.03%. 8)
Al: max. 5%. 9) N: max. 0.5%. 10) Ti content is optional. Scrap:
1) Ti: min. 70%. 2) Mn: max. 0.02%. 3) Si: max. 0.3%. 4) S: max.
0.03%. 5) S: max. 0.02%. 6) C: max. 0.2%. 7) P: max. 0.02%. 8) N:
max. 0.2%. 10) Ti content is optional Silicon
Micro Mist
Silicon Micro Mist-a Ferroalloy By-Product: Which is also called
Silicafume or Silicon Micro Mist, is collected and disposed out
of the soot together with the exhaust gas by specialized
equipment during the process of the high temperature fusion of
silicon alloy. Among the soot, the content of SiO2 is over or
equals to 90%. The Silicon Micro Mist has a big amount of SiO2 as
its ingredient. It is quite steady and the quality index of each
component is also quite good practically and is widely used in
the water conservancy, hydroelectric and concrete projects. Also
most fire-resistant material manufacturers have chosen this
product due to its large amount of about 97% of SiO2. Ferrosilicon
Ferrosilicon Features: 1.Applied mainly to the deoxidization in
steel making ,or used as additions of Si element Popular
inoculant of grey cast irons,Dl castings and compacting Graphite
grey cast irons.Alloying basis and adjustment of
inoculants,nodularilizers And graphite compacting agents.
2.Produced from an electric arc furnace of 12500KTA with high
tapping temperature And then poured in thin forms after
normalizing treatment soundness in microstructure With
homogeneous composition and clean surface appearance. Rare-earth
Ferrosilicon Features: Produced by one step technique with high
tapping temperature. Poured in thin forms after normalizing
treatment.Characterized in high reducibility of Si and RE,low
harmful elements and adjustable of effective elements Nanometer
Titanium Carbide(TiC) Powder
Main specification: Purity >99%. Dissociative Ti < 0.3%.
Average particle diameter(nm):20. Specific surface area(m2/g)
> 120. Crystal phase: Hexagonal. TiC is available with stable
quality at very competitive price. Multicolor
Coated Steel Sheets
1) Made of high quality galvanized panel and colophony dope. 2)
Width: 914 - 1,200mm. 3) Thickness: 0.25 - 0.6mm Tinplate
Strip / Coil
Features: 1) Surface: as bright as mirror ; 2) Standard: complies
with national standards ; 3) Widely used in home appliances,
packaging and vehicle fitting. Specifications: 1) Thickness: 0.15
- 0.4mm ; 2) Width: 150 - 580mm ; 3) Steel grades: SPCC ; 4)
Hardness: T2.5 - T4 ; 5) Tin coating mass: 2.8 / 2.8 Pipe
Fittings with Ferrules
1) Nominal pressure: PN 16 - 32MPa. 2) Nominal diameter: 5 -
20mm. 3) Applicable medium: oil, water, gas, and other corrosive,
non-corrosive medium. 4) Applicable temperature (C): -20 - 440.
5) Material: 20#, 1Cr18Ni9Ti, Cr18Ni12Mo2Ti, 12CrMoV, 316L. 6)
Concerted pipes diameter: 4 - 42mm. 7) End thread: G, ZG, ZM, NPT.
8) Reasonable structure, tight tolerance. 9) Reliable sealing
function, long service life Ferro-Cr-Al
Heating Resistant Wire and Strips
Ferro-Cr-Al Heating Resistant Wire and Strips: Iron chrome
aluminum resistance has traits of high electrical resistance,
small resistance temperature coefficient, high use temperature.
With good corrosion-resistance under high temperature, especially
apply to air with sulfur and sulfid, it is so cheap that is ideal
heating material for industrial electric iron chrome aluminum
resistance has traits of high electrical resistance, small
resistance temperature coefficient. Ferro
Manganese
High carbon ferro manganese: 1) MN: 75% (min.) ; 2) C: 7% (max.)
; 3) SI: 1.5% (max.) ; 4) P: 0.25% (max.) ; 5) S: 0.03% (max.) ;
6) Size: 10-50mm / 10-60mm / 10-100mm 90% (min.). Medium carbon
ferro manganese (type 1): 1) MN: 75% (min.) ; 2) C: 2.0% (max.) ;
3) SI: 2.0% (max.) ; 4) P: 0.3% (max.) ; 5) S: 0.03% (max.) ; 6)
Size: 10-50mm / 10-60mm / 10-100mm 90% (min.) Si-Ca
Alloy
We are in strong position to supply Si-Ca alloy with Calcium
content ranging from 31-33% min and silicon content as 55-65%,
lumps, grannues and powder are available. Supply from china. Calcium
Silcion
We can supply you calcium silicon. 1. Ca 28.0% min. SI 55-65% AL
2.4% max. C 1.0%max. 2. Ca 30.0% min. SI 55-65% AL 2.0% max. C
1.0% max. Size: Under 40 mesh,0.2-2mm,1-3mm,20-60mm,10-50mm Ferroalloy
Ti 68-72, Al 5% max, SI 2% max, C 0. 2% max, Mn 1. 5% max, P 0.
05% max, S 0. 05% max, Cr 1% max, Pb 0. 01% max, Sn 0. 05% max,
Zr 0. 05% max, Size 0-100 mm Radiant
Tube and Strip
This product's wire posses the characteristics of high
resistance, low temperature coefficient of electric resistance,
high operating temperature, good corrosion resistance under high
temperature, especially under the atmosphere containing S, as
well as the lower price, it is widely used in industrial electric
furnaces, household electrical appliances and other electrical
equipment. Machined
Aluminum Part
Specifications: 1) Material: aluminum, carbon steel, bronze. 2)
Product weight: from 0.01kg to 10kg. 3) Main equipment:
numerically controlled drill machines, numerical controlled
milling machines, machining centers. 4) Main product using area:
laser equipment, textile industry, food industry, automobile
industry, ship fittings, diesel engine parts. 5) Surface
treatment: plating with zinc, chrome and nickel, sand blasting,
anodizing, sand blasting Femo-Ferro
Molybdenum
FERRO MOLYBDENUM 65-70% (FeMo). CAS Nr. 7439 98 7. HS 2000:
720270 Ferro Molybdenum. Chemical Analysis-FeMo. Mo 65 to 70%. Cu
max 0. 5%. P max 0. 05%. S max 0. 12%. Si max 1. 2%. C max 0.
05%. Material consisted rough surface pieces of dark grey colour.
Properties Density: approx. 8, 8 g / ccm. Bulk density: approx.
4, 0 g / ccm. Approx Melting range: 1800 to 1950 degree C.
Particle sizes: 20 to 50 mm Ferro
Phosphorus
Ferro phosphorus. Phosphorus(P):23 - 28%. Silica(Si):2.0% max.
Carbon(C):0.5% max. Size:10 - 50mm,90% min. Packing: In plastic
woven bag of 1MT net Alloy
Wire
Specifications: 1) Types: W3Re / W25Re, W5Re / W26Re. 2) Grade I:
a) Diameter: 0.1mm, 0.25mm, 0.5mm ; b) Working temperature: 1,200
- 1,800oC ; c) Tolerance: ≤ ± 0.25%t. 3) Grade
II: a) Diameter: 0.25mm, 0.5mm. b) Working temperature: 0 - 400oC,
400 - 2,300oC. c) Tolerance: ≤ ± 4oC,
≤ ± 1%t Ferro
Sulphur / Iron Pyrite / Fes
S content 47% min ; Fe 42% ; SiO2 0. 3% max ; As + Pb 0. 1% ; Zn
0. 1% ; Size: 10-60mm ; 20-80mm ; 30-120mm ; 200mesh ; 325mesh ;
0. 8-10mm
|
